Blank canvas in Laughlin, NV.

BUT the big question is............................did somebody do great work like you do?????
alien GIF
 
  • Haha
Reactions: Newdude

Enjoying this content?

Support TFP with a donation.

Give Support
Winter progress...
Here is a 100' roll of grass, hard part was getting it off the trailer by myself. (ok 12 year daughter helped a bit)

20220129_080349.jpg

Little rope fence to protect, well me.

20220131_141254.jpg

Good news is that my to-do list for this pool can now fit on one sheet of paper. Grass installation soon. Couple other minor things, then it's, dare i say? PLASTER!!!

🤪 hopefully.
 
Todays fix.
Well, way back in aught '21, I grouted the pebble border in between the travertine coping and the concrete deck. Everything was pretty until the grout cracked all along the concrete edge.
My fix is to put silicone in that pretty little cut groove. The silicone should allow for some movement.
Next week should be interesting...

20220311_154748.jpg
 
I'm not 100% certain, but I think you want something along the lines of deck-o-seal, not silicone. Silicone does not flow like the self leveling sealants and I doubt it has the flexibility of them either.


Maybe @ajw22 has some advise on this?

--Jeff
 
  • Like
Reactions: akageorgi
Do not use silicone. It is the wrong material for that surface just like grout was.

Put a foam backing rod into the joint. Then fill it with self leveling polyurethane mastic. Deck-O-Seal can be used or


 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.