Hi All
Just wondering why my CH would go
from 320 to 650 when it has never been higher than 350? We haven’t much rain yet so I’ve had to use fill water which when tested with Taylor k-2006 is 40. Not sure if that’s good or bad. I’ve had to lower my PH to compensate for the high CH to keep my CSI in check. Should I drain a little water or just leave it alone?
Thanks
FC 6
PH 7.3
TA 70
CH 650
CYA 50
Temp 87
CSI -0.03
Just wondering why my CH would go
Thanks
FC 6
PH 7.3
TA 70
CH 650
CYA 50
Temp 87
CSI -0.03