Aquarite Board Problem - Clicking Sound

[hammerhound]

I have a Hayward Aquarite system running my Houston saltwater pool. I am getting a "clicking" noise from the main board. It sounds like a relay is going on and off or there is a small power surge.

The board is Hayward Aqualogic PCB-Main.

Here is a short video of the noise:

Wait about four or five seconds for the clicking. Besides this clicking noise, the system is otherwise functioning with no errors. I would appreciate any thoughts on what is going on.

Thanks,

Steve
Houston, TX

 

[JamesW]

Go to diagnostics and see what the readings are.

Are the readings steady or fluctuating?

Press the + button to reverse polarity and recheck the readings.

Then, press it again to reverse polarity again and recheck the readings.

Does the clicking happen when the chlorinator is turned off?

 

[JamesW]

Also, check to see if one of the relays is clicking on and off.

 

[chlorinatorpro]

Wait...you mean you have an AquaLogic system, not an AquaRite?

What lights are on on the control box? Do you get a message on the display? You zoomed in too close for us to see the lights.