About to install a SWCG. I’ve been using 10% chlorine and muriatic acid exclusively since discovering TFP last year. I just tested the water to see where my salt levels are, and the peak of the yellow is 6.6 which translates to 3770 ppm.
Does this sound possible?
FC 6
CC 0
Ph 7.4
TA 80
CSI 0.01
CH 450 (I know, I know, I need to bring this down to ~350 before using the SWCG)
CYA 40 (and I need to bring this up to 80)
Does this sound possible?
FC 6
CC 0
Ph 7.4
TA 80
CSI 0.01
CH 450 (I know, I know, I need to bring this down to ~350 before using the SWCG)
CYA 40 (and I need to bring this up to 80)