Aqua Rite display defaulting to Chlorine %

[Ribbod]

Normally the default display is Salt level, for whatever reason it is now defaulting to chlorine percentage display.. any idea how this happened or how to fix?

 

[Ribbod]

DISREGARD.... I figured it out:

I had inadvertently switched to AL-4 which made the default the percent output.

 

[ajw22]

Press the diagnostic button until you get to the salinity display.

Pressing the diagnostic button sequentially will display:

• Default salt display
• Pool temp
• Cell Voltage - When not generating, the voltage is about 30 to 32 volts dc. When generating, the voltage drops about 1 volt per amp of current.
• Cell current
• Desired output (% of the knob)
• Instant salinity
• Product name
• Software revision (r.XX)
• Cell type

 

[JamesW]

• AL-0 is AquaRite.
• AL-1 NatureSoft.
• AL-2 MineralSprings.
• AL-3 SmartPure.
• AL-4 This changes the default display from average salt to percent output.
• AL-5 This is used with Jandy automation.
• AL-6 means regular Aquatrol with a flow switch.
• AL-7 means AquaTrol RJ (Return Jet with no flow switch).