I have the T-9 Salt Cell and Aqua Rite 900 board. Start of my 4th season with both. I started the season by inspecting my cell, so far I inspect my cell at the start of the season and clean/inspect at the end of the season. Cell looks great with next to zero build-up and follow the recommended cleaning procedure.
After inspecting my cell this season, upon start-up, my "No Flow" light stays lit.I checked my flow switch, and ensured it is pointed in the correct direction and reset my salt level. Restarted my system and the "no-flow" started blinking and switched to "generating". Figured I was good to go.
Today when the timer kicked on, I checked it again and I am back to a non-blinking "No- Flow" light. I powered off, unplugged everything, kicked it back on and the "no-flow" light is still not blinking. The system is flowing/running well.
Am I missing something? Is this the sign of a bad flow switch or a bad board? Any help or tips is appreciated. Thanks!
After inspecting my cell this season, upon start-up, my "No Flow" light stays lit.I checked my flow switch, and ensured it is pointed in the correct direction and reset my salt level. Restarted my system and the "no-flow" started blinking and switched to "generating". Figured I was good to go.
Today when the timer kicked on, I checked it again and I am back to a non-blinking "No- Flow" light. I powered off, unplugged everything, kicked it back on and the "no-flow" light is still not blinking. The system is flowing/running well.
Am I missing something? Is this the sign of a bad flow switch or a bad board? Any help or tips is appreciated. Thanks!