I have never posted on here. I just read all of the time. Pool started leaking ran out of chemicals etc.. long story short pool filled with algae over the winter. I had ran out of cya testing supplies so just guessed and added a lot of bleach. And kept fc high for almost 1 week. Fc stayed around 20. ? pool went from green to cloudy greenish blue almost over night, but since then no improvement. I cannot see the bottom. My new testing kit came today. Cya was 30 at most. So slam level should only be 12.
Also, I have well water with iron and manganese. Could that be causing some problems? If so how would I fix that?
Cya 30 (at most)
Oh 7.0 or less
Fc 12
Cc. .5
19500 gallon vinyl above ground pool
Sand filter
Please help!
I have backwashes the filter every time the pressure raises.
Also, I have well water with iron and manganese. Could that be causing some problems? If so how would I fix that?
Cya 30 (at most)
Oh 7.0 or less
Fc 12
Cc. .5
19500 gallon vinyl above ground pool
Sand filter
Please help!
I have backwashes the filter every time the pressure raises.
Attachments
Last edited by a moderator: