As I had to replace the gear shaft seal from my pump. I had to redo the suction side of the tubing, since the pump is in such an awkward position that I had to remove it to repair.
All tubing is glued, though I get some small air bubbles under the lid.
Nothing that much to really worry about, though the strange thing is that they are not constant, but they come in flurries every 30 seconds or so, and then last for about 10 seconds or so.
I would have thought that if there is a leak at the suction side, you would have the bubbles constantly.
Does this sound familiar to someone or can someone explain what the most likely cause is?
All tubing is glued, though I get some small air bubbles under the lid.
Nothing that much to really worry about, though the strange thing is that they are not constant, but they come in flurries every 30 seconds or so, and then last for about 10 seconds or so.
I would have thought that if there is a leak at the suction side, you would have the bubbles constantly.
Does this sound familiar to someone or can someone explain what the most likely cause is?