I do have a fair number of birds with all the trees around my pool along with the accompanying leaves, twigs, etc. This is our monsoon season so blowing dust is common. Also a fair number bees die in my pool.
for example last night I lost 10 ppm of FC.
COMPLETELY unrelated. Running a robot has no relationship to FC loss. Unless, you have a layer of live algae on your pool bottom that your robot is stirring up into the chlorinated water.And one more thing, I've noticed when I run my pool robot every day I loose 5-6ppm of FC!
COMPLETELY unrelated. Running a robot has no relationship to FC loss. Unless, you have a layer of live algae on your pool bottom that your robot is stirring up into the chlorinated water.
You are having some really bizarre chlorine fluctuations.........losses for which there are really no answers. You are using the K-2006 FAS/DPD chlorine test, correct? You are comortable with your testing methods, too,,,,,,correct?
I would caution against putting the robot in the pool during very high chlorine levels. It even states in the owners manual about doing so. The high chlorine levels can do a number on the cord and it’s plastic parts.
If you think the bot may have some algae, simply clean it out good, and let it dry out completely in the sun for a couple of days.
Bizarre. If you lost 10 FC overnite 12 days or so into the SLAM, how much FC have you been losing in the twelve days prior.......should be at LEAST 10 ppm or more. What has been the look of your pool water for the past 5 days or so?for example last night I lost 10 ppm of FC.
If you lost 10 FC overnite 12 days or so into the SLAM, how much FC have you been losing in the twelve days prior.
What has been the look of your pool water for the past 5 days or so?
I am trying to look at your daily FC consumption. Your AM numbers don't tell the story because you don't include how much FC you are adding.
It doesn't need to be perfect, but can you tell how much FC you have been consuming daily since 8/6?
Unfortunately there is no viable screw. I was just thinking about caulking around it with silicon. Thoughts?Is the light removable? Does it have a screw at the top side of the ring?
I was thinking the same about it not coming out, unfortunately the algae is on the inside of the light, not outside.Buy a HARD toothbrush.
Scrub
That light ain't coming out.