I just noticed a leak at the union for my pump return on the way to the filter. The union joins the PVC to the pump and in these pictures you'll see some water glistening under the joint. I'm not sure what the white goo stuff is. But you can see the discoloration on the pump where the water has dripped and there's a wet spot on the pad.
I don't want to get in over my head and wondering what's involved with this repair. Would I be cutting and gluing PVC or can I just unscrew the union and put in a new o-ring or something like that? Thanks!
I don't want to get in over my head and wondering what's involved with this repair. Would I be cutting and gluing PVC or can I just unscrew the union and put in a new o-ring or something like that? Thanks!

Attachments
Last edited: