Additives
- Thread starter Shorty240
- Start date
"What's in it?" is my first thought.
"What's the point?" is my second. The first is the more important though, shouldn't add something to your water if you don't know what it is so you know what it might react with.
"What's the point?" is my second. The first is the more important though, shouldn't add something to your water if you don't know what it is so you know what it might react with.
- Jun 1, 2018
- 16,112
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Also I just don’t see how water could get anymore moist?
Trying to help with the hard water feel when you get out! This was give to me as a sample. I’m really cautious about what I put in my water!!
Antifreeze and glycerin.
Try adding salt like folks who run SWGs do. You'll love the feel even if you're not using the SWG device.
Maddie
Maddie
- May 20, 2020
- 1,003
- Pool Size
- 13600
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Solaxx (Saltron) Reliant / Purechlor R5
This appears to be the SDS for it:
3. COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTS:
PROPYLENE GLYCOL USP, *FRAGRANCE* (Parfum, PURIFIED AQUA, DIMETHYPOLYSILOXANE, COULD CONTAIN: Vitamin E (Tocopheryl acetate), Vitamin C (L-ascorbate), FD&C GREEN #3 (CI 42053) RED # 4 (CI 14700) &40 (CI 16035), FD&C YELLOW #5 (CI 19140), BLUE #1 (CI 42090), D&C RED #33 (CI17200), YELLOW #10 (CI 47005), & VIOLET #2 (CI60730).
So I read that as water, a little antifreeze, a little plastic, some silicone based antifoaming agent, and some smelly stuff.
Probably not dangerous, but not personally something I'd put in my pool.
3. COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTS:
PROPYLENE GLYCOL USP, *FRAGRANCE* (Parfum, PURIFIED AQUA, DIMETHYPOLYSILOXANE, COULD CONTAIN: Vitamin E (Tocopheryl acetate), Vitamin C (L-ascorbate), FD&C GREEN #3 (CI 42053) RED # 4 (CI 14700) &40 (CI 16035), FD&C YELLOW #5 (CI 19140), BLUE #1 (CI 42090), D&C RED #33 (CI17200), YELLOW #10 (CI 47005), & VIOLET #2 (CI60730).
| Name | CAS Number | EINECS Number | |
| 1. Water | 7732-18-5 | 231-791-2 2. | |
| 2. Propylene Glycol | 57-55-6 | 200-338-0 3 | |
| 3. 2-Methyl-1,3-Propanediol | 2163-42-0 | 412-350-5 | |
| 4. Dimethypolysiloxane* | Not Established | Not Established | |
| 5. inSPAration Fragrance(1)* | Not Established | Not Established |
So I read that as water, a little antifreeze, a little plastic, some silicone based antifoaming agent, and some smelly stuff.
Probably not dangerous, but not personally something I'd put in my pool.
- Jul 17, 2019
- 4,079
- Pool Size
- 13000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Try adding salt. Edit - Yes. Salt water feels so much silkier when it dries on you.
You can start to taste salt a little over 3000 ppm. Keep it a tad under that and you’ll get all of the feel without the taste.
** and it’s still only 1/10 as salty as sea water.
** and it’s still only 1/10 as salty as sea water.
It works so well many posters don;t feel any need for a shower after swimming. Soft, silky water.
You'd want to first test how much salt you currently have (yes, you do!) and then add salt to take it up to about 2500ppm.
Maddie
You'd want to first test how much salt you currently have (yes, you do!) and then add salt to take it up to about 2500ppm.
Maddie
Similar threads
