Pool is finally up and running and here are my numbers
Build Type: Plaster
Volume: 24000 gallons
------------------------------------------
Latest Test Result Summary:
FC: 0.5 (yesterday)
CC: 0.5 (yesterday)
pH: 8.2 (yesterday)
TA: 70 (yesterday)
CH: 70 (yesterday)
CYA: 0 (yesterday)
SALT: 3200 (yesterday)
TEMPERATURE: 71° (yesterday)
CSI: -0.29 (yesterday)
=====================================
Pool Math is telling me add 15lbs of CYA and 62lbs of calcium chloride our water here has no calcium apparently.
I added 20 baume MA to lower pH but with Easter festivities did not get to retest. I will tonight and repost. I have a SWG and I am running it 8 hours a day at 70%. As I try to tune in the right amount of run time based on sunlight here is SC.
Is the amount of calcium and CYA something I should add in slowly (I have read about sock method for CYA) and are the suggestions for where to buy CYA since all I seem to see is chlorox for $25 a 5lb tub near me. Also not seeing a lot calcium chloride available in the south.
Thanks
Build Type: Plaster
Volume: 24000 gallons
------------------------------------------
Latest Test Result Summary:
FC: 0.5 (yesterday)
CC: 0.5 (yesterday)
pH: 8.2 (yesterday)
TA: 70 (yesterday)
CH: 70 (yesterday)
CYA: 0 (yesterday)
SALT: 3200 (yesterday)
TEMPERATURE: 71° (yesterday)
CSI: -0.29 (yesterday)
=====================================
Pool Math is telling me add 15lbs of CYA and 62lbs of calcium chloride our water here has no calcium apparently.
I added 20 baume MA to lower pH but with Easter festivities did not get to retest. I will tonight and repost. I have a SWG and I am running it 8 hours a day at 70%. As I try to tune in the right amount of run time based on sunlight here is SC.
Is the amount of calcium and CYA something I should add in slowly (I have read about sock method for CYA) and are the suggestions for where to buy CYA since all I seem to see is chlorox for $25 a 5lb tub near me. Also not seeing a lot calcium chloride available in the south.
Thanks