Hi guys
My iAqualink that was working for 3 months by now stopped working last week. Green LED just won't stay on.
Out of nowhere...
Wired setup, static IP. Can ping the controller. Ethernet plug works just fine 'cause i hooked up my laptop to verify the connection.
AllButton controller reads "Aqualink WiFi" panel on ID=3 in "Diagnostics". Aquapure works just fine.
Actually, EVERYTHING works fine except iAqualink.
I checked wires...8.6V between red and green (1-4 on red connector)...i guess additional assertion is that AllButton panel sees iAqualink panel just fine.
When i unplug ethernet jack - pings stop...plug it back in - resume. But just red and yellow LED's; green goes "on" once and then does not come back.
Of course i reset my RS8 a couple of times...no dice.
I would blame my FIOS router for not allowing outgoing connections...but this is nonsense since there's no MAC filtering enabled and my laptop goes online just fine when plugged into this jack.
Lastly, i tried wireless connection...grabs IP just fine and i can ping it from my home network. But no green light.
What the heck happened?
I don't want to shell out $300 for iAqualink 2.0 (which is a subsequent upgrade from iAqualink 1.0 that i have)
Any help...
THANK YOU!!
My iAqualink that was working for 3 months by now stopped working last week. Green LED just won't stay on.
Out of nowhere...
Wired setup, static IP. Can ping the controller. Ethernet plug works just fine 'cause i hooked up my laptop to verify the connection.
AllButton controller reads "Aqualink WiFi" panel on ID=3 in "Diagnostics". Aquapure works just fine.
Actually, EVERYTHING works fine except iAqualink.
I checked wires...8.6V between red and green (1-4 on red connector)...i guess additional assertion is that AllButton panel sees iAqualink panel just fine.
When i unplug ethernet jack - pings stop...plug it back in - resume. But just red and yellow LED's; green goes "on" once and then does not come back.
Of course i reset my RS8 a couple of times...no dice.
I would blame my FIOS router for not allowing outgoing connections...but this is nonsense since there's no MAC filtering enabled and my laptop goes online just fine when plugged into this jack.
Lastly, i tried wireless connection...grabs IP just fine and i can ping it from my home network. But no green light.
What the heck happened?
I don't want to shell out $300 for iAqualink 2.0 (which is a subsequent upgrade from iAqualink 1.0 that i have)
Any help...
THANK YOU!!