My Intex 18'x52" ultra frame sat with a cover on it all winter. Recently I pulled the cover off, drained most of the water to hard plumb it, vacuumed it, and then refilled it. The water is now a milky green color. I just had the water tested at everyone's favorite pool store and due to how much was drained, the CYA reading came back as zero. Now obviously due to the nastiness of the water I would like to SLAM it. I'm wondering if I should fix the CYA first, or just start dumping bleach in it. I have an Intex SWG that has yet to be tested and is currently off. My readings are as follows:
FC:0
CH:110
Salt:2000
CYA:0
TA:150
pH:7.8
Thanks
FC:0
CH:110
Salt:2000
CYA:0
TA:150
pH:7.8
Thanks