I have a letro legend II and the back end is sticking up. The back wheels will not set flat on the pool surface. Any tips would be greatly appreciated.
Hi djbee761! Welcome to TFP! I too have a Letro. You will need to play around with the jets on the back a little. They probably need to be pushed up some. A very little amount of change will make a big difference so don't over do it.
I have a letro legend II and the back end is sticking up. The back wheels will not set flat on the pool surface. Any tips would be greatly appreciated.
Are you talking about when it's not on? Mine does that sometimes but I don't worry about it. If it's doing that while it's on, then that is when an adjustment to the valves in the back or the ballast float will correct that. Otherwise, it's no big deal.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!