Hello everyone, I've noticed the water flow seems a little low on our pool so I read the Hayward manual and it said a potential problem could be an air leak. I went out and noticed a lot of air bubbles in two of the three return lines in the pool. I cleaned the pump strainer basket (had quite a few leaves in it) and turned it back on. It wouldn't fill more than about 3/4 of the way to the top of the lid, and I did notice quite a few air bubbles in it as well. I'm going to try the soak test with a water hose tomorrow, but my concern is the one line that doesn't have any air bubbles coming out of it. Hoping that doesn't point to an in ground issue. Thanks for any other suggestions.