Hallo guys
if read the previous threads about tjis low pressure issue,it seems to corralete,but mine is abit different.
let me start from the beginning,
i stay in this godforsaken south africa where service delivery and customer service and satisfaction left the building together with a few other guys in 1994.
Thats one part of the problem,the other part is that the pool cleaner/zodiac pacer only runs for a few minutes then gets to a stands still in filter mode,but in bypass mode it runs like heck.
i had 6 companies here already,the first one overhauled the pump and replaced the pipeline from weir to pump. but it made no difference,then this guy just disapeared.
so i moved on to the next few,and as soon as they here that the pump has been overhauled they seem to loose interest,maybe because its the easiest way to make money and if someone else has already done it,then there is nothing left for them.
ok,to get back to the problem
new line from pump to weir,"new" overhauled pump,new filter sand did so last week friday.
apparently its also correct for the pool cleaner to fall of the wall while sweeping,wich is not correct in my book.this also happens in filter mode,but in by pass it goes like a dream.
any suggestions. isthere a way i can do a pressure check,might it be sucking air.
might it be sucking air at the selector? or at the filter? the filterfingers are all fine,inspected them last friday.
please guys ,im with my hand in the hair.
im so desperate,that i might just fly an expert in from the uk or anywere in the world.
if read the previous threads about tjis low pressure issue,it seems to corralete,but mine is abit different.
let me start from the beginning,
i stay in this godforsaken south africa where service delivery and customer service and satisfaction left the building together with a few other guys in 1994.
Thats one part of the problem,the other part is that the pool cleaner/zodiac pacer only runs for a few minutes then gets to a stands still in filter mode,but in bypass mode it runs like heck.
i had 6 companies here already,the first one overhauled the pump and replaced the pipeline from weir to pump. but it made no difference,then this guy just disapeared.
so i moved on to the next few,and as soon as they here that the pump has been overhauled they seem to loose interest,maybe because its the easiest way to make money and if someone else has already done it,then there is nothing left for them.
ok,to get back to the problem
new line from pump to weir,"new" overhauled pump,new filter sand did so last week friday.
apparently its also correct for the pool cleaner to fall of the wall while sweeping,wich is not correct in my book.this also happens in filter mode,but in by pass it goes like a dream.
any suggestions. isthere a way i can do a pressure check,might it be sucking air.
might it be sucking air at the selector? or at the filter? the filterfingers are all fine,inspected them last friday.
please guys ,im with my hand in the hair.
im so desperate,that i might just fly an expert in from the uk or anywere in the world.