Sunplay $400 - pull the cables to the attic, plug into interface, run cat 6 to router. There's a few "how"s to consider, but pretty painless if you're the DIY type.
If you want different speeds you need to make new feature circuits. You should make something like this:
POOL - 1250 RPM (This circuit needs to be your lowest speed)
POOL Medium - 1800 RPM
POOL High - 3250 RPM
You can call these features whatever you'd like from the scroll down menu or by creating custom names.
The way you've described the speeds above will just cause the pump to default to the highest speed since all three speeds are assigned to the same circuit.
When you schedule these speeds:
POOL - 12PM-8PM
POOL Medium - 2PM-3PM
POOL High - 7PM-8PM
- - - Updated - - -
Also, I exclusively use SceenLogic on my phone for pool commands (PC only for programing) and have had none of the issues that you mentioned above. What is the phone app showing that is different from the PC screen?
if it is a apple product, you will have to go into security and click on it to ok it to load.Just received our ScreenLogic bundle, and tried to download the software on our computer but our antivirus detects it as a threat and deletes it! Going to have to override that mess.
Sent from my iPhone using Tapatalk
if it is a apple product, you will have to go into security and click on it to ok it to load.
I have never had any other antivirus have an issue with it.
Yes you can run the pump as long as it has power to it. No need for ScreenLogic or any programming at the panel although it will be a great deal more difficult to set up.