I'm trying to decide whether to get a 115V VSP and use my existing electrical setup or changing the breaker and getting a 230V pump. I see that the 115 V pumps have a higher WEF. I've also looked at the bump performance curves and I'm not sure I'd run my pump at the highest RPM. My total TDH is between 20-30 feet. I have 1 1/2 inch piping. My sand filter is a Hayward S240 and the pool volume is about 33,000 gallons. Any pointers/suggestions/recommendations is appreciated.
230/115 V Variable speed pumps
- Thread starter BruceK90
- Start date
- Jul 21, 2013
- 52,891
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
