I'm officially done with the SLAM. What do I do next? Should I let the chlorine drop before turning on the SWG? Theres been questions about if my SWG can actually chlorinate my size pool so I'd like to test and see. How should I do that? And my CYA is 60, should I bring it up to 70 now or wait and see how much chlorine the SWG is able to produce?
SLAM done. Now what?
- Thread starter NaniSpinaka
- Start date
You can raise the CYA now and let the FC drift down some prior to turning on the SWG
- May 3, 2014
- 58,745
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
A good tool on dialing in a SWCG is SWG Run Time Calculator
I would start with a 2 ppm FC loss per day and see if the SWCG will keep up.
Take care.
I would start with a 2 ppm FC loss per day and see if the SWCG will keep up.
Take care.
