One of my LED lights was scuffed up on the 2nd day of the pebble sheen install, pool builder said it wont affect light output? Should I have him replace it or is this a non issue?
Thanks for any advice
New pool build- damaged light?
- Thread starter Troyjam
- Start date
One of my LED lights was scuffed up on the 2nd day of the pebble sheen install, pool builder said it wont affect light output? Should I have him replace it or is this a non issue?
Thanks for any advice
- May 23, 2015
- 24,455
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
My OCD would kill me on that, i’d want it replaced. Plus, did the plaster crew even cover the lights with tape to protect them?? It looks like they splattered plaster all over the niche.
I’d demand a new light.
I’d demand a new light.
- Jun 7, 2017
- 9,121
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
- Jun 7, 2017
- 9,121
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
Really that has nothing to do with OCD the lens is physically damaged. The housing looks really bad and will be noticeable. These lights are too expensive to allow a sub to damage and not replace it. If you saw that used on eBay what you pay for it?
- May 23, 2015
- 24,455
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
We need a dedicated thread to store PB responses to issues. Won't effect the light output! HA! But looks like dog doodoo.
NOPE and adult word NOPE!!!! You messed it up, you replace it WITHOUT me even having to ask if you are a stand up person. If you are not...........then guess what you replace it after I take a bite or two out of you! GURRRRRRRRR
