Hayward Superpump Wiring ???

[JFPMarsPA]

I just received a new Hayward Superpump model #SP2607X10 (1 HP). Both the sticker on the housing and the card inside the cover say its wired for 230 V (please see attached picture). It looks to me like its wired for 115V. Am I missing something?



Thanks,

Joe

 

[Jimrahbe]

Joe,

It looks like 230 volts to me..

It appears that to be in the 115 volt position, the black part with the arrow on it in your pic, would need to be connected to the open terminal, one spot down..

Let's see if we can get some more confirmation...

edit... Check this out.... http://www.inyopools.com/HowToPage/how_to_wire_a_pool_pump.aspx?CommentPage=1

Thanks,

Jim R.

 

[JamesW]

It's wired for 115 volts. To switch to 230, move the selector up one so that the black wire lines up with the 230 arrow and the white wire is not connected to a spade terminal.

 

[JFPMarsPA]

Shall I toss a coin!!!!

 

[Jimrahbe]

JFP,

No coin toss needed, I was clearly wrong...

See steps 6, 7, and 8 of my link above... makes it pretty clear your current set up is for 115 VAC..

Sorry for the confusion I caused,

Jim R.