Easy Touch 4, Solar Heating and Water Features Pump Speeds

[Iceman 21]

When my Solar Heater is activated (which is most of the day) my pump speed is 2800 RPM’s. My Water Features pump speed is 2100 RPM’s. Is there a way in Screen Logic to program the pump to ramp up to 3000 RPM’s when BOTH Solar AND the Water Features are activated, then back down to 2100 RPM’s when ONLY the Water Features are activated?

 

[Jimrahbe]

Ice,

If you mean automatically, I don't think so. The EasyTouch does not do much in the way of and/or programming.

Jim R.