Hello everyone!
I have spent a lot of time reading through the forums and thank everyone for their time contributing to help people like myself out.
I am planning to install a new Pentair EasyTouch 4, new main pump (Pentair Intelliflo VS 011012) new booster pump (Pentair LA-MS05), and all new plumbing and valves. I have a 20,000 gallon pool, with waterfall, and existing solar that I will continue to use. I spent time putting together a diagram showing how I plan on plumbing the pool. I was hoping someone could give it a look and provide any feedback or things you would do different. I have spent HOURS reading through installation guides, tech specs, etc. I am an engineer so I am pretty comfortable reading installation guides and tech specs.
I attached a diagram to this post that I put together. Please see the link in this post.
Here is my equipment list that I plan on purchasing:
-Pentair EasyTouch 4 with IC20 PN# 520592
-Pentair Intelliflo VS Pump PN# 011018
-Pentair Boost-Rite Booster Pump PN# LA-MS05
-Pentair ScreenLogic Kit PN# 522104
-Pentair Pressure Side Cleaner Kreepy Krauly PN# LL505PM
-pH Controller PN# 521377
- Required check valves, valves, and actuators, temp sensors (3) - if anyone has a brand they prefer I am very interested in this. Trying to keep things with all the same manufacturer, but if it makes sense I would like to know.
Will the EasyTouch4 be sufficient? I need to spend a bit more time running through the book to understand what types of things it is capable of be default, like cleaners, main pump, booster pump, solar. Compared to the additional "features" they are referring to. I think they only "feature" I have is the waterfall.
Can the EasyTouch also handle the power to the IC20 without a separate Power Center?
I really appreciate the help in advance!
I have spent a lot of time reading through the forums and thank everyone for their time contributing to help people like myself out.
I am planning to install a new Pentair EasyTouch 4, new main pump (Pentair Intelliflo VS 011012) new booster pump (Pentair LA-MS05), and all new plumbing and valves. I have a 20,000 gallon pool, with waterfall, and existing solar that I will continue to use. I spent time putting together a diagram showing how I plan on plumbing the pool. I was hoping someone could give it a look and provide any feedback or things you would do different. I have spent HOURS reading through installation guides, tech specs, etc. I am an engineer so I am pretty comfortable reading installation guides and tech specs.
I attached a diagram to this post that I put together. Please see the link in this post.
Here is my equipment list that I plan on purchasing:
-Pentair EasyTouch 4 with IC20 PN# 520592
-Pentair Intelliflo VS Pump PN# 011018
-Pentair Boost-Rite Booster Pump PN# LA-MS05
-Pentair ScreenLogic Kit PN# 522104
-Pentair Pressure Side Cleaner Kreepy Krauly PN# LL505PM
-pH Controller PN# 521377
- Required check valves, valves, and actuators, temp sensors (3) - if anyone has a brand they prefer I am very interested in this. Trying to keep things with all the same manufacturer, but if it makes sense I would like to know.
Will the EasyTouch4 be sufficient? I need to spend a bit more time running through the book to understand what types of things it is capable of be default, like cleaners, main pump, booster pump, solar. Compared to the additional "features" they are referring to. I think they only "feature" I have is the waterfall.
Can the EasyTouch also handle the power to the IC20 without a separate Power Center?
I really appreciate the help in advance!