Hey everyone. I may have a complete cell failure. I have Inspect Cell and Low Salt light flashing and my salt reading is 800.
Here is what has happened the last few months:
1. About 1.5 months ago, I had Low Salt and Inspect Cell light. I cleaned cell and added salt. Everything was fine.
2. Two weeks ago, my current limiter went out in the motherboard. I replaced. Everything was fine.
3. Two days ago, salt reading went down to 1600.
4. Yesterday, I got the above error.
The cell is about 3 years old, but the previous owners of the home and pool were not very bright. I doubt the cell got it's regular cleaning and was never removed and stored for the winter. I've researched the topics at TFP and on Google and believe my cell has gone bad, but before I order a new T-15, I wanted to see if there was one last ditch item that I am forgetting to do?
Test results:
Salt: 3400
pH: 7.5
FC: 5
CYA: 80
TA: 60
Here is what has happened the last few months:
1. About 1.5 months ago, I had Low Salt and Inspect Cell light. I cleaned cell and added salt. Everything was fine.
2. Two weeks ago, my current limiter went out in the motherboard. I replaced. Everything was fine.
3. Two days ago, salt reading went down to 1600.
4. Yesterday, I got the above error.
The cell is about 3 years old, but the previous owners of the home and pool were not very bright. I doubt the cell got it's regular cleaning and was never removed and stored for the winter. I've researched the topics at TFP and on Google and believe my cell has gone bad, but before I order a new T-15, I wanted to see if there was one last ditch item that I am forgetting to do?
Test results:
Salt: 3400
pH: 7.5
FC: 5
CYA: 80
TA: 60