spillover

Bear with me, this is a question with a few parts. I understand that the "proper" solution to some of those parts might be to rip something out and start again. While I respect that opinion, that's not feasible for me at the moment, so I would appreciate other options, even if they are not...

Hi guys, I'm a newbie. I currently have a pool under construction that has an elevated spillover spa. I am working with the OmniLogic system so I have lots of electric actuators to work with and I want to make sure that the spa isn't heating the pool unnecessarily via the spillover...

Hi, I’ve been following this website for a good year or so and finally opened up the pool myself this year. We bought our house that had this pool with spillover spa about 3-4 years ago. The heater went the first year and finally just got it replaced this year. I know there’s a way to heat the...

I've tried searching through the forums and have found many helpful answers and advice. I have a Hayward PL-PS-8-X288 SmartControl panel and I am trying to automate my spa spillover to run 1 or 2 times a day to cycle chlorinated water from pool to spa. I figured out that I need to use an Aux...

I have a combo pool/spa controlled by a Pentair Intellitouch. The actuators for suction and return are both seized. The indoor control panel is gone. I have replaced the actuators and set the cams so that the suction goes to spa with return on spa. Also the valves go to pool suction with return...

I have 2 spa spillovers made with travertine stone. The water will not sheet unless I cut off pool circulation and put all of my 2.65 hp pump to spa return. On one it still sticks sticks to wall. I know I need to do some grinding and smoothing of the stone. I wanted to know what is best tool to...

I’m a new pool owner and first time posting. I have a question about the spillover mode setting on my pool/spa combo controlled by an RS6 aqualink system. When I turn on spillover mode the Jandy Actuator Valve turns while the pool pump is running. Is that an issue shouldn’t there be a delay to...

Hi all First time pool owner and someone struggling to fix an issue that seems to never end. Also worried I am being taken advantage of by contractors due to my lack of knowledge. A quick background 1) Have a large underground pool and attached spa. Saw that when pump was running the pool...

We are renovating our pool and our spa spillover will be 34" wide. We were originally set to have a solid stone spillover but then it was discovered the stone didn't come in a long enough piece . Our choice now is use the stone in 2 pieces with a grout line or use a solid piece of granite. I...

Hi, sorry if there is already an answer out there in this forum. I did search, but didn't find it. If you know there's already a good thread, please send me the link. I have a new(ish) pool, and automation using the iAqualink app. I have it set up on a schedule that includes pool filtering...

We are troubleshooting an issue with our new pool in Texas, built by Anthony & Sylvan. We have a tiled spillway and when we turn up the pump speed we get a nice sheer flow and it doesn't run down the split face stone. However, in the daytime when we aren't using the pool the pump is on low for...