aquapure

I asked Jandy about this, and they weren't interested in helping. What is the correct positioning and orientation of the breather tube? Should the end with the angled cut be on the top or bottom? Should the angled cut face the pool (outlet) or the pump (inlet)? How high relative to the...

Hi. I have an Jandy AquaPure 1400 salt cell generator and I’m currently getting an error code 123, but only when the flow is reversed. I’ve never had a Jandy cell last more than three years, so this current cell is a warranty replacement. Jandy is zero help with this issue except for telling me...

I replaced my cell after 4 years when it seemed to stop producing much chlorine. After replacing the cell, cable and sensor it’s not consistently producing chlorine. Power cycling the unit appears to start it in different cycles. If I get ‘on’ and ‘flow’ it produces chlorine. If it starts in...

Hello I have a Jandy AquaPure with IAquaLink. Three days ago I started getting an error message reading on my interface app showing water temp SHORT and my salt water generator stopped producing chlorine. I have chlorine production set to 75% in the app but it reads 00% on the panel. By all...

I have a large pool (60,000+ gallons) and installed a pair of APure 1400s about 15 years ago, and have maintained them since. They have been largely trouble free other than cell replacement and cleaning. We recently went on a trip for a couple weeks and before I left I checked and everything was...

A jumper is cut for the PURE700 cell and connected for the PURE1400 cell.