Search results

hello, I have an IC40 w relatively short life. It is Flashing Cell LED. I push the More button to Test. I get a Red LED on the " Low " , Solid Green LED on CELL, and The sanitizer output only have 1 LED. what does that mean? I tried to find a way to search this forum for maybe...

Southern California. Los Angeles county area. Thanks. - No Autofill - Not much rain in the pass 2 month. - I will add a bag of salt and test again.

I also have a big drop in salt level. using the taylor test kit. It was about 3900ppm about a month ago. It is now at 3200ppm. I didnt really have to fill the pool more than the usual evaporation. Can my filter cause this? I didnt really clean it for the pool open this year yet.

Gotta thank you again. At 3800 seems like I can keep the chlorine level strong at a lower duty cycle. it is now at 60% I think I can go 50%. Also the if I forget to put in acid doesnt seem to foul the SWG cell as easy. So I have been relying on the Pentair cell to tell me proper salt...

Wow Thank you so much. I added one 40 lb bag of salt and the IC40 is behaving correctly.. Im at good solid green Cell light and water Chlorine level is up . I depended on the IC40 salt level reading at solid green led on salt level. So I wont do that now and test w taylor kit. good...

how high should I take it up to?

on with the saga.. I tested the salt level with the taylor kit. it turn salmon color at 17 drops. so 3400ppm of salt. gave in and changed flow switch and the IC40 still blinking check cell. .. Looked at the fins inside the IC40.. it was Clean!!!! arg. The 2 middle fin have a little bit...

Cell Date 5/26/2016 When i press the More button a quick second time I get a single LED at 80% Still cycling to salt test alternating lights at salt level box once in a while. Im thinking my water chem is all out of wack. We are doing a roof replacement right now and some roof dirt got into...

I will do that this evening. For sure there is enough flow my intelliflo pump is running at good speed for the pool cleaner.

The pool seem to be retaining some Chlorine level but the IC40 just keep cycling to salt testing.

Thanks JoyfulNoise This is what I got from the 3 second More button push diagnostics. Easytouch shows water temp at 85 degrees for reference. Salt level LED in the Solid green at Good Flow LED Green After 3 second More button push LED scroll. the Sanitizer output box I Lit 1 LED 20% then...

Is my IC 40 cell dead? I have no Calcium deposit and the IC40 blink LED indicating Check Cell. The Plates looks ok. one plate have a bit of wear but not a lot It is a 3 year old replacement.

So one of the center plate broke off in my IC40. I assume the chlor Cell is toasted after 5 years of service. Before I get a new Cell at $600 2 Questions 1. Any way to repair it? 2. Anyone tried retrofit to Intex Krystal Clear Saltwater system at way lower price?

Ok. I can use an extra inch of water. I will add some today.

got water tested FAC 0 ph 8.0 TA 110 CYA 40 Salt 4700 So the intellichlor totally misread the salt level at 54 degrees I added about 30 oz of MA to get the PH down The intellichlor " cell " light still didnt light up. Got the Cell light on after I started heating up the water with my spa...

after 4 min or so the red (low salt) light stay solid. \ Power light - on Cell light - off flow light - on Sanitizer output - 60% Easy Touch diagnostics reads 2350ppm (Very low Salt) Temp is 54 degrees I added 2 bag of salt this week. The rain must have really screwed up the salt level.

Intellichlor IC40. flashing both green and red light Is this normal? both green and red light flashing. Pwr Cell lights are on solid green. Sanitizer output on 60%. 14000gal IG pool - Added 1 bag of salt it is still flashing. Test shows I am getting really low Chlor level. I also...

thanks. seem like Pentair has a package for the easy touch panel, intellichlor and actuators as a package. Now should I ask for the 20 or 40 cell. it will be about a 15000 gal capacity pool.

My builder is recommending Pentair Intellichlor to use with Easy Touch wireless control. Any Opinion on the Pentair SWG? Since Pentair and Zodiac is the only brand he carries. and Intellichlor is suppose to interface with wireless control of my Intelliflow VS pump , Heater and lights...