Search results

and thanks @1poolman1 !

I went ahead and put it back together and no leaks when I filled the basket and no leaks when I turned it on (after I used some teflon tape on the basket drain plug). Quiet operation so I think I'm good until new the pump arrives.

Is the bellow portion the piece the threads onto the shaft or is it part of the seal itself?

ok so I took a picture of where it was leaking. I took it apart again and saw the problem (I hope). I was missing a piece on the backside of the impeller so it wasn't mating correctly (see pic before i added the missing piece). Water was getting past the seal plate. See picture. So before I...

I have a new pump on backorder, but to get through this season I ordered a new motor for my failed Superpump. I replaced the motor today but I have seem to have done something wrong as it pours out water from the bottom when I fill the pump basket. It appears to be coming out where the motor...

ah yes, I read that thread the other day.

This is what I see in the Superflo manual Maybe the 'most' is what disqualifies the intelliconnect.

Interesting, I will have to be careful It looks like the newer SuperFlo VST does work with IntelliConnect. However it seems the T is for Trade Grade and that is only available at brick and mortar stores. Do I have that right?

My 1HP Hawyard Superpump is effectively dead. The pool is about 20-25k gallons. I have chlorine injection via stenner pump. I believe leaking from the stenner caused corrosion and the premature demise of my pump. I am going to relocate the stenner to try an remedy that. I am looking for a new...

RE heat. I (mostly) buried my bucket. It is just a 5 gallons though. Burying it works well, I believe I measured the water temp in the buried bucket in the 70s when I was testing. For comparison my pool heats to almost 90 naturally.

opened the skimmer valve all the way and retrieved it from the basket. Thanks!

I'm not proud of this but tonight I was trying to figure out why I had air in my lines and when I pulled the basket out to check for suction the skimmer sock got sucked down the line. I ran over and turned the pump off. What do I do? waste out and hope for the best? will it cause issues or...