Search results

Hi All Need some advice please, my iaqualink is having issues, keeps turning off, forgetting settings and each day I reset it and it forgets the next day so I think I need a new board, it's the old 2.0 wifi system if that helps. When I search I find so many boards but not sure which one to...

Thank you RDspaguy I appricate that, its odd I can't see to manually removing that hazing, I tried a tiny bit of acid in one area too and didn't touch it but yet you can now see where we move around the spa its gone clear again...not sure what we are doing to make it do this but I need to do the...

Hi All, recently bought this tub and it has shell issues and wondering if it's anything I can have repaired, has anyone ever seen issues like this, the clear coat has gone hazy in places and there are also little spots of bubbling. When you rub your hands on it you can't feel any obvious clear...

Thank you very much for the replies I will have to check my dip switches as I had a company install this a few years ago now so not sure what it's set for. I do have Slr Priority set as on but I can't quite see a difference between it being on or off. Having a play this morning with the...

Hi All, can someone please help me out with a iaqualink issue. I have a heat pump and also solar panels for the water on my roof, have the valve setup and all works but I want to run the solar heating on its own but I can't seem to set it without having the pool heater on as well. I have my...

Anyone any ideas please?

Hi All Wonder if one of you kind folk might be able to help me. I recently had a iAqualink installed for my pool, solar and pool heater control. Everything has been running just fine but something that's bothering me is the solar control. My parents have a Hayward Oncommand which so far has...

Hi All All of a sudden my pool heat pump has quit working, I am getting the error message "Water Therm Open" , I thought it might be a thermistor so I replaced that but it's doing the exact same thing. Anyone else know what might be the issue please? says my pool temp is -27 degrees right now...

Hi Guys Need some advice please, I have a friend who's in ground pool and spa currently uses a Hayward Pro Logic controller but its not in good shape and needs replacing. I am considering a Hayward Omni Logic system as I am thinking the wiring won't be that different and also the internet...

Thank you. All sorted :) Soon as I pulled out the solar sensor and put it on the roof the valve started turning and Valve3 light up on the display. Thank you again so much.

OK just re-read the manual....always a good idea :) So the water one is correct where it is, the air one is not in direct sunlight so that's good its just the solar I need to have up high as you mentioned. OK think I got it, will report back. Still not sure about the actuator though, am I...

Thank you so much. Just a quiry about the sensors I have three black ones, an air sensor, pool sensor and solar sensor and all three look exactly the same. So should the air sensor be high up in the sunlight on the roof (loose)? The solar installed up high in solar facing the sky (plumbed)...

Thanks guys for the support I have been out and checked the temp sensors to make sure everything is working as it should, right now 11am the air is 86, water 83 and solar 85 and they are all in the correct location. I have the solar sensor down by the valve, you think it should be higher up...

Hi Guys Hope someone can please help me, earlier in the year thanks to some fantastic advice from members here I installed a Hayward Oncommand and its been such a great controller to replace my old 1992 Jandy. I have it setup just the way I want now and the last piece to the puzzle was...

Thank you to everyone who replied to my post, I have the OnCommand installed and its working great, very pleased with it and it does everything I need. Thanks Stuart

Great thank you very much, so by the looks of it I wouldn't even need a dual thermostat heater then if the OC controls it all. Thank you so much, got the OC mounted tonight but need to run more power cable for the 220v connection but its been fun removing all the old equipment. :)

Hi Guys Whats considered one of the better pool heaters out there and which should be avoided? I have had a few over the years but it seems they have been bought out by other companies and the names change around. At some homes locally a Submit heater was popular till a couple of years...

Heliocol seem to be a long lasting solar panel, I have had mine for 7 years with no issues and I just purchased 10 x 12ft panels from a local guy who removed them when he got a new roof and decided he wasn't using the pool enough to reinstall them so I got all the pipe work and panels for $400...

Hi Kadavis Thanks for your reply, I have a older Rheem heater thats still holding on but soon as its done I am replacing it with a Heat Siphon, so I think I might understand how to install the heater and how it works, if I am correct you go from the OC 2 wires and splice into the line before...

Sorry once again to both you guys but I have now purchased the Oncommand and was just about to hook it all up and then realised I cant see how it would control a dual thermostat heat pump. Most of the control units I have come across or wired a heater upto has a High, Common and Low connection...

Hi Guys Thanks again for the advice I am just about to pull the trigger on this for my pool but one question if someone can please help, I think I found the answer but needed clarification. Can I set timers for aux relays. For example I want to install the spa air blower and have it run for...

5k gallons later, 10 oz of Ahh Some and still no end in sight :( Getting really despondent now, tried all sorts like leaving it in over night for a good soak and its still having brown foam on top each time. I got the sump pump which has helped empty it faster. I am climbing inside the tub...

Thank you Jim The original 1992 system was hit my lightening and the timer is bad and the board damaged and parts not available anymore so that can't be used. The only timer I have now is built inside my Hayward VS pump which is programmed up to start and stop. I really like the ONCommand...

Hi Guys So recently learned about Ahh-some, never heard of it before but I have owned my hot tub since 2008 and it was a used tub when I bought it, its a 2005 Caldera Elation Utopia 500 gallons so I was a little worried about what was going to come out of it and each time I am getting the green...