Search results

Not seeing OP stuff but see this: Snow Joe 20 lb. 94% Pure Calcium Chloride Ice Melt Pellets MELT20CPP - The Home Depot I have a salt pool so not worried about the extra sodium chloride but not sure about the rest: Active Ingredients: Calcium Chloride, 94.8%, CAS. No 10043-52-4; Sodium...

Was thinking more along the lines of turning the spa on on the way home kinda thing. Not worried about other folks. Kids are outta the house and wouldn’t do anything if, say, my wife was home and in the pool. But this helps regardless

Awesome!! So can you set it up where you can be remote and still use it? Or do you have to be in the same network as the hardware?

Ive seen a few posts about using android and windows to control a PS-8 via wifi. Thanks to the folks like mas985 who have done that. Has anyone figured out how to control one via web using IOS? Or do i need to buy an OmniPL upgrade? I don't have any home automation but did buy a Elfin EW11...

Thanks. Im slowly figuring things out. Great work from you guys as i read through this more i assume this is local wireless control only? i.e. the controller (windows PC) is on the same wifi network as the elfin and the elfin is not able to be controlled from an offsite pc or via the web? I...

Hi all, finally got the hardware, but still not clear how to hook it up. or control it from iphone or iPad or web. Heres a pic of what I got. Block is labeled elfin ew-11A. I understand elfin itself will sit outside the controller box. I assume i run jumper wires from controller terminal...

Where is the Ew11 unit after hooking it up? I assume its not weatherproof so curious

Im sure I coudl get them disposed of, but this is a relatively new motor in great condition. Figure someone who doesn't want to spend a lot on a new VS pump mght be willing to buy it.

I have the whole pump but the front is leaking (tried fixing it multipel times). Figured someone whos single speed motor crapped out might want a relatively new (2 yo) mtor vs shelling out a couple grand for a new VS pump (like I just had to do)

We just replaced our main single speed pool pump with a variable speed pump due to a leak we could not fix between the motor housing and the main pump. The pump is a 2004 Jandy Stealth 2 HP. The motor was replaced in 2021 when you could still get single speed motors. What's the best place to put...

Ended up with the Tristar 950 to be safe. Other work being done now. Will work on the programming later Thanks again for all the help

That's the one

Would this apply to Aqualogic also? (Not Prologic) I have a Goldline branded PS-8

Know anything about the OmniGL upgrade board and what extra fucntionality it give to VS setups? Thinking of doing this also for the internet connectivity (may have mentioned that before)

Thanks guys. Spa has 6 jets and the 2HP pump does fine right now. 13KG inground with large spa. Setup is pool mode pulls from pool returns to pool returns plus one in the spa, spa mode pulls and returns to spa, spillover pulls from pool returns to spa. Rheem 400KBTU Heater that is only used in...

Think the Tristar VS 900 is enough for a salt system on a 13000 gal pool? Current pump is 2HP single speed. Would I run vs all day vs the 8-10nhrs I run single speed?

Where do you get the shielded cable? And how does the connection work since the terminal block is wires vs a connector

So the black and yellow wire on the remote controller are the same as the comm links on the pump? If not I’d be basically tying the remote controller directly to the pump with the connection being the terminal block thet is also connected to ??? On the board

My pool guy found this pump but it looks to (maybe?) not have a comm port? Sp3215x20xe

My pool guy found this pump but it doesn’t look to have a control terminal block for a comm cable? Sp3215x20xe

Thanks. I was trying to make sure that when I push a button on the remote controller it doesn't affect the pump directly since they woudl be tied together. I.e its the same thing as tying the black and yellow wires from the controller to the black wire on the pump controller. Guess Im not sure...

And drive both a VS pump and a wired remote at the same time with multiple wires? I know about the ban

Just pulled the panel off the Aqualogic and see four wires going to the terminal block 18 mentioned (red black yellow and green, 1/2/3/4). Pretty sure this is for the wired remote controller I have in the house to control things. If I get a Hayward VS pump, can the VS connections piggy back on...

Awesome. Thanks. As mentioned I am pre Prologic, Aqualogic running 2.66 so do not have removable connection blocks, so guess its remove wires manually. I just went out and see the Variable speed option on filter config. So thats cool. Guess it only works with Hayward pumps tho? No chance working...

How would these pumps get wired up? My install manual shows 2 speed control with four wires and two relays but my pool guy says VS pumps are three wire only?

I don’t have a pump yet. Need one. Trying to figure out which one I might be able to use. My install manual Shows 2 speed control using tow relays and four wires but my pool guy says VS pumps are only three wires

Seen multiple posts from 2019 onward stating that if you have a Aqaualogic PS-8 with Rev 2.65 or higher, it shroud be able to control a VS pump, but no specifics on how to wire it up or program it So looking for anyone using a AL PS-8 with a variable speed pump. How did you wire it up and how...

have a Goldline Aqualogic ps8 controller and a single speed Jandy 2HP stealth pump for pool, Polaris 280 pump, small Jandy waterfall pump DE filter and gas heater. Pool/spa combo with internet ok actuators. Filter, Polaris pump and Heater replaced, everything else original from 2004 install...

Thanks. On our pool, the rocks are in the waterline (i.e the bottom of the rocks are submerged). So seems like waterline cleaning woudl help where there is tile, but no way it would work at all on the rocks. The "bench" is a ledge bult into the pool similar to a big step you can sit on.

Reading a lot of posts about robots and thinking of getting one. Couple things I didn't see input on related to our pool setup. We have a clover shaped 13000 gallon play pool with pebbletec vs plaster. We also have water line tile on part of the pool(where there is decking) but natural rocks on...