Search results

Hi All, I have a new issue. My pool has deck jets that are connected to a separate pump but there is a line running from the deck jets to the main return line. (See pic). 1.) When vac booster pump is running there is a steady leak of water out of the deck jets. This never used to happen...

Thank you for the help everyone. I fixed it and now able to shutoff main drains.

Yes, I believe its the black plastic tabs on the valve that limit the range of motion of the handle.

Hi All, I am having an issue with my pool. It was built about a year ago. I have alot of leaves, debris, pollen sitting at the surface. My skimmers (2) pick up about 20% of what is out there. I have aimed my jets, done all I can but it seems like there is not enough suction coming from the...

Hi All, MY pool builder installed my Jandy Pool System last year. Part of that was 3 Jandy Watercolor Nichless lights. 1 in the spa and 2 in the pool. They are all controlled by the same aux port. I want the ability to set my SPA light and POOL lights to a different color. The pool builder...

Success. All is good now! Thank you all.

Yes I do! And it does it when I hit spa mode. But not spillover mode. Just curious if it should.

Awesome thanks! I’ll try it shortly. Also when I hit “spillover mode” should the pump Pause like It does for spa mode? Right now it doesn’t.

Will this impact other functions? Spa mode right now changes both so that should be un impacted right?

Thanks! So here is an update I did all the changes. But i have a problem. When I click "SPILLOVER MODE" in the app, it turns only one actuator. Its turning the one that control main drain and not return. Attached picture of the JVA that is rotating. But the one for the returns is not moving.

Thank you all, I do have one more question. Right now in pool mode, it stops halfway between pool and spa return. Once I do this, i will no longer be able to have the spill over run as well as the pool returns, assisting in getting everything to the skimmers correct? (I guess this is one...

I currently do not have a pool mode. My return is on 100% of the time now with no option to disable. Thats what I am trying to accomplish. But as far as I am aware all the jets are supplied from the same pipe and no additional return besides the jets.

Hi @JJ_Tex. Thats not the intention. What I am trying to solve is when we are using both the pool and the spa (summer time) and I have it in SPA mode, the pool is completely shutoff, there for the surface of the pool gets full of debris, bugs, as the skimmers are off. I want it so when people...

@Jimrahbe and @mknauss , So I have not done this yet but I am getting ready to do it today. Here is my plan. Move pool light from AUX3 to AUX6 Change DIP switch to enable spillover mode Recam actuator so that when in pool mode, SPA return is fully closed In Aqualink, make changes to AUX...

I replied to wrong thread! @Jimrahbe i posted pics and info above. @mknauss Thank you!

Thank you! So im a little confused on spill over. Rightt now I have a "SPA MODE" option. That turns off the spillover but if SPA MODE IS OFF spillover is always running. Sending a pic of the equipment layout and of the app.

Great Thanks. And this would only be used in times where we are in the pool and others are in the spa. Just to get surface cleaned up and then happy to return to spa mode. I will follow the guide! Thanks :)

So I guess a better way to look at it is that I dont want to run both at the same time. Once the spa is hot I want to run the pool only and leave the Spa "As Is". That way if someone gets in there, even with no jets on, its still hot. Then the pool will run in isolation. Make sense? Think if...

Hello All, I have a new pool. It is 100% Jandy, iAqualink. I have a question that my builder cant seem to comprehend or are playing dumb. Right now, I have a "SPA" Mode. (main drain from SPA returns to spa only). I have a problem. When in this mode, because skimmers are not running, pool gets...