Search results

I just installed my new Hayward W3DE6020 DE filter. I would like to keep it covered from the elements. I searched online for a cover for it but only found one webpage and it looked a little flakey so I am hesitant. Anyone know where and even if these covers are sold? TIA

The guy at the supply house where I buy my equipment told me that the old all rubber only O ring can be used in place of this new very expensive metal reinforced O ring and it will work just fine. Anyone have any info on whether this is true or not? TIA

I am using Fiber Clear in my DE filter and the water is amazingly clear like it never was with DE media. That is because Fiber Clear filters down the single digit micron level. No cartridge filter can do that. I am staying with the DE grids.

I am not sure this is true. Every time I open my filter up there are very small particles of debris on the lip of the upper and lower halves adjacent to the O ring and on the O ring itself. I suspect that a portion of the inboard side of the O ring is indeed exposed to the water in the tank...

...."once the band clamp is tightened nothing is getting inside there...." Actually there is plenty getting inside there..... most filters are full of tiny little "rocks" that are picked up by the surface cleaner (older plaster pools probably pick up more - at least that is where I suspect most...

I believe that one of the reasons that the Hayward DE filters fail to seal up at the interface between the upper and lower halves is that every time the band clamp is installed and tightened up it is possible that it actually removes some the the mating surfaces on the top and bottom tank...

I recently installed a new O ring on my Hayward DE6020 filter. In doing so I thoroughly cleaned the O ring mating surfaces on the upper and lower housing to ensure that no debris was present prior to re-assembling. Although I wiped with a dry cloth those surfaces there was still some Magic...

Thanks to all who helped me with my decision. Old faithful lives on...................... The parts on these older filters are so much less than the new ones. The parts for the new filters are outrageous.

I have a Hayward DE6020 Filter that was installed when the pool was put in in 2004. The filter works great and there are no leaks. The filter has been covered with sunshade material that is used to screen out the sun and UV rays since 2009. I can get a good deal on a brand new exact...

Thanks for the Reply Jim, I only ask because I have the opportunity to pick up a DE7220 filter housing for a good price. My filter housing is about 20 years old. I have always kept it protected from the sun and still looks good. I thought if I had an opportunity to replace it I would. I...

I am wondering what if any negatives there would be to going from the DE6020 filter to the DE7220 other than it would require more media on cleanings and the grids would cost a little more than with the DE6020.

I am tired of redoing my expansion gap that runs around the perimeter of my pool. I came across this and was wondering if this would be a better alternative to the goopy stuff...

Just as a point in reference. Last year here in texas the temperatures got well below freezing, in the teens for more than 24 hours. The power was out in many cases for more than 2 days (out in Fort Worth). My son lives out there and has a pool and his power was out for 3 days. He did not...

That's all fine if you have a power source, the grid but if the power goes off and you do not have an alternate source of power such as a gas generator to keep it running then.................

Thanks, yes I am completely familiar with my pool equipment as I do all the servicing myself. I have replaced the pump, motor installed new plumbing, do my own filter cleaning, installed new heater capacitor etc etc. so I am very familiar with all the drain plugs.

Thanks, I have plenty of ventilation as my pool equipment is out in the corner of my property and not even close to the house. These patio heaters are designed to keep the people under them and around them warm on cold nights. I have a brand new patio heater in the box that was never opened...

I have a portable patio heater that runs off a propane bottle. I am wondering if I would be able to run this patio heater adjacent to my pool equipment to keep it from freezing in the event the power goes off and it is below freezing. Thoughts on this idea? TIA

I recently switched from DE to Fiber Clear DE filter media. WOW, I love this stuff. Water is sooooo much cleaner. I have never had this sparkling crystal clear waster before. Pressure rise was not significant after switching for the first time. I made sure my grids were really clean and the...

I have been considering this pump for my pool. https://www.hayward-pool.com/shop/en/pools/tristar-xe-i-trixe I currently have a single speed Tristar. The programming of the XE seems a bit strange and not straight forward or user friendly. TIA

What I have found is that even with balanced water, high phosphates contribute to algae growth and even with balanced water I still get algae growth here in Texas. The other thing I should mention is that my pool is surrounded by grass and plants......and I mow once a week so I think that...

Thanks everyone, I did have my water tested at the pool store. I do have a kit at home and I need to use it instead of using the pool store. I did not purchase the phosfree at the pool store not that it matters but I bought it online. I use bleach, borox and baking soda and HC acid but I...

My water was crystal clear. FC 12 PH 8.7 TA 113 CH 209 CYA 54 Phosphates 1143 I added some PoolPerfect PhosFree and now my water is milky white. What happened and what should I do to clear it up? TIA

So going by what you have said, filter gauge is about 4 ft higher than pump gauge 26-2=24 psi Also, the pressure in the pump will be higher by 1 or 2 psi. 24-1= 23 to 24-2=22 And taking into account the tolerance variation of 1 to 2 psi So the equivalent pump pressure compensated for as...

Thanks to all that have contributed to wanting to help me figure this out. So here are the updates on the situation. This morning I went out and looked at the gauge on the pump and it was reading 38 psi. I removed the gauge and the needle dropped but stopped at about 24 psi. I tapped the...

What I meant to say is that I installed the Multiport valve and the system ran at filter 20 psi and pump 23 psi for 2 or 3 weeks. Then without changing anything I just happened to check the gauges and the pump gauge is elevated.

I will swap out the gauge and see what another gauge reads.