Search results

The plug that connects the cable inside my IntelliCenter to my IC60 is unreliable. The slightest movement of the cable causes the IC60 to lose power. I was considering cutting both cables and joining the four individual wires together with Wago connectors. Anyone see a problem with this plan...

If you have one or two for sale in Texas, please let me know.

Like-new condition "Cappuccino" color Includes adapter kit Comes ready to install in standard umbrella anchors Fits standard pool umbrellas $375 UPS Ground shipping or pickup in the Houston area https://www.srsmith.com/en-us/products/in-pool-furniture/tables-seating/

Brand new 55 lb sealed bucket of granular technical boric acid. Asking $100 (no tax or expensive shipping). Meetup in Houston, Spring, Tomball, Woodlands, Montgomery, Conroe, etc..

I'm selling a set of brand new ultra fine pleated filters for Maytronics/Pentair robots for $55. Marina sells them for $70, and states compatibility as follows: S200 S300 S300i S400 M600 Active 20 Active 30 Active 30i Active 40 Active 60 Explorer E30 Pentair Warrior SE Pentair Warrior SI...

I'm going to paint the exposed PVC at my equipment pad. For those that have used Krylon Fusion or Rust-Oleum 2x, were you satisfied with the results? Does anyone have a different favorite/recommended brand of paint?

Does anyone know the final (stable) firmware for the IntelliFlo 011028 pump? I have 2.08 installed now.

Looks like the actual chart has been replaced by a dialog prompting the user for LC/SWG/SLAM and CYA level. Any chance we can get a link to the previous "chart"? I liked the rows and columns format...

Looks like 2.006 is available on the Pentair website. https://www.pentair.com/en-us/education-support/residential/product-support/pentair-pool-and-spa-software-downloads/intellicenter-download.html My panel didn't see a new firmware available when I checked for an update. Anyone know what...

Since we are a community that likes measuring things, I connected my Kill A Watt to my robot (Warrior SE) and ran a two hour cleaning cycle. Total consumption was 0.17 kWh, so the average power consumption while operating is 85 W. Using TX electricity rates, a two hour cycle costs two cents...

Pentair IntelliCenter i5PS Personality Expansion Card 521936Z Upgrades your IntelliCenter i5P system to an i5PS. Slide connects to the i5P main board. Asking $475. PM if interested.

I have 5 MicroBrites and 2 of them are causing problems. One light produces a slightly (but noticeably) different color than the other 4. One light remains dimly illuminated while the light selection is changing. The other 4 are dark. Any ideas on fixing these?

Ever since "upgrading" to 1.064 and the IntelliCenter2 app, I'm not able to control my IntelliChlor via the app on my phone. (The "Home" option doesn't work either.) Everything works correctly at the panel and through the webpage controls on intellicenter2.com Anyone else have this problem...

AquaCal sells a condensation drain kit (STK0202) for around $100, but you can install essentially the same system with ~$5 of parts from the hardware store. It took me around 10 minutes to complete the job on my SQ150VS. For parts, I installed a 1/2" MIP threaded fitting with a 1/4" barb for...

Cleaned my CCP520 for the first time. Although the pool has been operational for 14 months, the cartridges weren't very dirty. The hairnets in the skimmer baskets really worked well. I did notice some rust on the inside of the lower half of the filter housing. Is this normal or something...

Looks like I might have algae or dirt inside one of my MicroBrite lights. From what I understand, these are sealed units, so I'm not sure how water got behind the light lens. Any ideas?

Just got a new AquaCal SQ150VS and everything works fine in stand-alone configuration. However, when I attempted to control the heat pump with automation (IntelliCenter), when the compressor started up, the IntelliFlo pump shut down. The IntelliFlo started again by itself around 30 seconds...

The past few days it seems my IC60 isn't generating the expected amount of FC. I've had it set at 100% output and it can barely maintain the current FC level. Cell appears to be functioning normally with all lights green. Pool Math calculates the IC60 will generate 11 FC every 24 hours, and...

Almost new heat pump that has pipe damage from the freeze a couple months ago. Selling for parts or someone that wants to tackle a repair project. Asking $750.

VGreen165 Variable Speed Pump Motor ECM16SQU (Brand New in Box) Integrated User Interface Timer Mode Manual Mode Freeze Protection Noise Reduction Design Factory Default Settings Reset Ball Bearing TEFC Rotation: CCWPE Single Phase Schedule Advance Full Variable Speed (600-3450 RPM) Max Output...

After the freeze, my MicroBrite lights as well as my equipment pad light and landscape light transformer (both controlled as relays via IntelliCenter) are not working. I hear the "clicks" when I attempt to turn them on, but it seems like they aren't getting power. Any ideas?

My IC60 suffered freeze damage and the outer shell is cracked. Is it possible to repair or is this a lost cause?

I had my tiles blasted with MaxxStrip PF2 and wanted to share my experience. Here are the "before" pictures showing extensive calcium scale and other accumulated junk from my pre-TFP days: Here is the product. (PF2 is less aggressive, PT2 is more aggressive.) Here are pictures...

Got a Whatagate for my pool and installed it today. (It's a device that attaches over an overflow drain grate to block the flow of water.) Here's the Whatagate next to my existing overflow drain cover: The device simply clicks into place on the drain cover. Here's pics of my overflow...

Does anyone here have a Whatagate? This seems like a simple and effective way to control your overflow drain https://www.whatagate.com/

Where can I get the purest calcium chloride? It appears that even pool store calcium chloride comes with fillers and additives, to the point that they're less pure than some snow melt products.

My IntelliCenter is up and running, but I can't hide my disappointment. It struggles performing fundamental tasks, such as maintaining communication with my IntelliFlo pump. I frequently get a "VS Communication Lost" message. The IntelliCenter app doesn't work well at all. I have to close...

I'm looking for a recommendation for a quality corner/detail brush. All of the Amazon reviews for those type of brushes suggest poor quality and durability. Anyone have one they're happy with?

What's the minimum acceptable pH for plaster startup? I have Pebble Sheen. I also have very high TA fill water (340). My startup guy is trying to reduce the TA all at once, which is pushing my pH into the mid-6 range, which I'm not comfortable with. Evidently a large negative CSI also...

I need several screening trees or tall bushes for privacy after my build is complete (Houston area). Any suggested species that won't generate much debris or interfere with the pool shell/plumbing?