Search results

So those did not quite fit and are not the appropriate part. The retaining rings are the correct diameter and thread pitch, but are meant to screw into something backwards to mine and only screw in a finite distance. I am in trouble

While not an exact match it looks like the retaining ring on the hydroair eyeballs are 1.75" and may work. Got an order in will update if it's a match. https://www.getpoolparts.com/product/27267/eyeball-retaining-ring-white

Bought a house with a pool that has 8 jets with 1.75" wide threaded holes set into concrete. The nozzles and retaining rings are brittle and do not adjust so I unscrewed them, see pics. What are these and where could I find them? Everything I see on the internet is 1.5". Literally cannot...

Exactly the level of detail I was looking for. Makes sense, thanks so much! TA has crept up with pH, working on getting it sub 100, this morning when pH was 8+ TA was up to 180. Lots of evaporation out here in the desert so trying to keep LSI neutral because the calcium can get pretty bad...

Maybe you can explain this, but I dont understand the chemistry as to why this would be the case. Equating chemistry to conservation of energy in physics I'm not sure is an accurate representation of whats happening. No matter what the pH is, the SWG runs the same amount of time. Do...

Having trouble keeping pH and TA in alignment, the fight is real. Our 10k gallon pool has floor jets that cycle to both the pool as well as 1 zone that cycles to a spa with spillover. There is no way to stop the spa zone which means there is no way to stop the spillover. The floor jets are...

Ok managed to determine it was just the cap and flange that exploded luckily. Managed to get the rest of the flange out with a hacksaw and flathead screwdriver. Crisis averted!

I broke the cap and flange trying to get the cap to unscrew... there is nothing to grip now, how would you suggest I pull out the remaining flange sleeve so I can put a new one in...

Ok had a eureka moment... Both the pool and spa light in the easytouch are set up as "INTELLIBRITE", which they are... but I believe this is what is tripping up the easytouch. When i change one light the other one lights up and vice versa and treats them as the same thing. Once I changed the...

Hi Jim. Yep I am able to manually turn one or both on individually, but when I try to set a color say on the pool light while that circuit is on, the system automatically turns both circuits on and sets to that color. I can't figure out how to separately set a color for each. I also have no...

Hi all, I currently have a pool light and a spa light, both are intellibrite, both are set to intellibrite and assigned to the pool and spa light function on EasyTouch. I have been trying to do some type of red and green cycling opposite between the pool/spa for xmas, but cannot figure out...

Thanks Jim! Your concern about it being set upside down is noted and I'll definitely look into it. The other point about the spa I believe is a non issue. I have floor jets that cycle across both the pool and the spa anytime a pool program runs, so both the pool and the spa are getting...

Thanks so much! Yes I turned the heater settings way down so they didnt accidentally attempt to kick on before I was confident it was set up properly. I have 3 actuators in my setup, one that I believe triggers intake from the spa floor when a spa program runs, one that triggers flow through...

System works now for the most part, but I have yet to kick on the heaters. I replaced the salt cell in the same direction that they initially had it and havent gotten any flow errors. I am familiar with water chemistry and the pool is balanced and in good condition (other than hardness being...

Hi all, New to forum and new to pool ownership. I recently bought a house with a boatload of pentair equipment installed. It is a in ground gunite pool with raised spa w/spillway. It has a 400k BTU pentair heater as well as a roof passive solar setup. Also has VSP and salt water generator...