Search results

So am I understanding you are saying Pentair is more versatile with updates because it can be updated via Firmware and Jandy is only hardware updates?

My current pool is Pentair Intellicenter and to be honest, I have not been impressed over the last 3 years with all their "growing" pains with different apps, downtimes, and seemingly short comings with technology. and have almost had all the equipment get replaced under warranty except 1 pump...

wow appreciate this, found the part for $29 on amazon

.....AGS (Automatic Gas Shutoff). is whats lit up[

My service heater light is on and the guy who helps me with my pool came out and said my model is 1 year before they display error codes, he got Pentair on the phone and said its the control board. So i ordered a new control board put it in and its doing the same thing orange Heater light...

no sorry maybe my message wasnt clear. my fill water from my tap is 200PPM, so its actually lowering it, my pool is currently around 515 and raises 15-20PPM. I am taking water samples to the pool store and they are testing the water. Please lets not turn this into a water test kit thread. The...

well my pool has a small leak which is actually working in my favor because its adding in auto-filler water (200 hardness) and helping mitigate the scenario but as this leak gets fixed its just going to exacerbate the hardness rising. I am not putting cal-hypo in the pool

My pool is approx 18 months old and I am about to have it acid washed for the 3rd time. The finish is pebbletec pebble fina. Long story short the calcium hardness steadily rises until I get calcium buildup that looks like white scale marbling all over my pool. The tap water in my city is 200...

the previous thread had all sorts of pertinent information moving to a a new thread really diminishes the value and information

Moved from here. Just bumping this up as my pebbeltec pebble fina is having similar issues. White plaster dust after initial fill was suppose to all just brush away easily. well it didnt after 4 months the plaster company came and did a drain and acid wash and it was beautiful. Now it has...

Glacier was the proper answer for me because I already had a NG heater for my Hottub and my pool being only 10,000~ gallon its easy enough to heat. The glacier chiller I had schedule to run from 10:00PM to 8:00AM Thursday/Friday/Saturday for primary pool use of friday/saturday/sunday. I was able...

I feel like it is down so much that it MORE than warrants someones job at pentair. It is EMBARRASSING how often I goto login and its down

So let me backup a bit, after they did the plaster (Pebblefina) they told me be religious about brushing it as it will produce like a white material from the plaster while it cures, and I did, I brushed the thing like 10 times a day but the white stuff was STUCK, it would not come out especially...

I have my IC40 set to 25% and after a hard day of usage I usually do the Superchlorinate function inside my app. Does this sound about right?

Great thank you everyone! Appreciate everyones input and answers.

I havent been using my heater for the summer however the water does go through it, do you have an example liquid chlorine, amazon link? tf-100 EDIT: something like this...

I use my intelliPH to inject acid generally my PH is on the hide side 7.8-8.0. i am using DryTec Calcium Hypochlorite Granular Calcium Hypochlortite 68% to shock the pool My last stats were PH 7.6 ALK 90 FAC 4.7 TAC 7.5 PO(Phosphates) 174 MT .3 CYA 36 CH 391 Salt 3100 I do the testing myself...

My pool is approx 1 year old, details in my sig. The calcium hardness from the tap is 150, but about every 2 weeks my hardness is going up about 15 points. Once it gets up to 450, I have been draining about 30% of my water and refilling and it brings it back down to about 300 and then it starts...

Saturday I left it running all day, the pool never got above 86, the temp was 100 degrees with a heat index of 115. So this is TOTALLY acceptable. I left it running until this morning, the water was 79. My arms are a "walking" I wonder if I should open the feed valve a little more to get a...

Ran for 11 hours took my pool from 83 to 80 over night, seems like it did nothing? i would think just the cooler night air would bring it down 3. However the true test will be after a hot day when the water is 90+ if it can get it back to the low 80s ill be satisfied. I enjoy swimming 84-86...

I got mine installed yesterday. Some *notes* My system is a flooded systems (pool equipment is below water line) I hooked both the Intellivalves up on the feed/return (VALVE A/VALVE B)from the chiller and its activated as a Feature. I scheduled the feature to turn on at SUNSET and off at...

@MyAZPool thanks for keeping my integration of Glacier Pool Chiller in the back of your mind, I appreciate it. I was told 5 weeks ago the Alexa would be back up in the Skills, but nothing, have you heard anything around Alexa coming back for IntelliCenter

I have ordered mine, I will keep this thread updated as a documentary of the process, then hopefully others who want to go this route with Pentair will have a documented solution

FWIW i am on V1.040 I hit the update firmware from my intellicenter, it just sat there for 20 minutes and said please wait nothing ever happened

So you dont think I could "repurpose a heat type like Hybrid/UltraTemp/Solar" and add this for Cooling? also thank you so much for those detailed screenshots, Ive never even seen that interface it must be a web interface ill have to find out how to attach to my system, does this take into...

I thought this EXACT thing. Here is the exert from the install guide @MyAZPool what are your thoughts on the delay. I would like to have this scheduled, and then under the features be able to toggle "Chiller" ON (if I cannot get the auto temprature shindig going Also could i hook this up as...

I got the PDF for 2020, take a look! Ok so that answers my question on the IntelliValve, full open , but it seems to say "delay" opening the suction side, can I program like a 30 second wait for that?

Yes, Thank you, everything you said makes sense, Thank you for that level of detail it is extremely helpful. As far as why he didnt use AUX 1, I am not sure, he had been installing EasyTouch for the last 10 years and I forced him to use IntelliCenter, I was his first install, I am sure...