Search results

No water on cover from underneath. It started low but unclear how it compares them to now

Drilling new holes in patio? I didn’t get a straight answer about why not pulling it tight other than it’s as tight as it goes

Solid cover is probably 15 years old but in good shape minus a few small patches. This year the cover is really limp and appears to be laying against the water (lowered below skimmer). Pool company said it’s “stretched”. Is that a thing ? Or just not installed properly

Thanks for advise. Yes, the threaded studs are rusting. I thought of canvas tarp but rain and snow would weight it down. I’ll try that and some grease

My pool was winterized and the diving board removed. I want to cover up the base to prevent rain/snow but can’t think of an easy way besides ton of thin plastic wrapping. They make diving board covers but that’s for the board being in place. I thought of a chair winter cover but the rain and...

Thanks. That's the same product as the one in my original post, correct?

I don't see any style like the one in the attached picture. I don't believe that's standard 1.9". This one tapers from 1.66" to 1.83"...

Sorry -- Oct-Memorial Day -- Winter closing only.

Any ideas on how to cover the spill over spa? I am thinking some sort of tarp that goes over the spa opening and the rocks but not sure: 1) What tarp? 2) How to attach it?

NO notifications. The app is horrible. Filter needs to be cleaned but has been previously backwashed and pressure is low.

PH 7.5 ALK 60 CYA 30 FC 10 (Pool opening) CYA def. went up. Water is crystal clear. I'll order a new kit but I am good. Thanks.

I store it in the a temperature controlled area throughout the year. I cannot explain the difference between the 2 tests. I'd be more inclined to believe my test except it was literally 20 or less. The entire tube was clear...

I run my pump around 1200 RPMS the entire year without FC issues. I noticed this year that I am getting a low flow (red light) on the unit so I raised rpms to 1500 but I still see it every now and then. It's quite possible I got the same error last year (at 1200 RPMS) but never noticed it as...

I opened my pool last week and my 3 year old TF-100 Test Kit test kit read nearly 0 for CYA. I took a water sample to Leslie and the other tests such as PH/ALK/FC/etc. closely match my test kit but CYA was nearly 0 for me and 36 for Leslie. I know Leslie (like others) are notoriously inaccurate...

Thanks. Any brass gauge 1/4 NPT with good reviews should suffice? And, for now, just get a 1/4 NPT plug, correct? I ordered 2 from Amazon but they might not arrive until Monday and I want to start running the pool filter. In North Jersey, stores are closed so I don't have many options.

My previous pool company “lost” the pool filter gauge and stores are closed on Sunday in my area. Is there anyway to run the filter till I can get my hands on one in a day or 2? The new pool company opens the pool tomorrow and don’t know if they have a spare.

Usually there is a few inches of water give or take on the bottom. Either way, the water should be drained lower than intake ports which have to be drained right ?

I am in North Jersey and the winters are cold with snow. I am in the middle of switching pool service companies. The current company drains the raised spill over spa nearly all the way down and blows out the lines, etc. The same hardcover used during the summer is reused. The 'new' company...

1) Constantly loses Wifi connection forcing me to kill the breaker for 30 seconds and re-start it and hopefully it reconnects on the 1st attempt 2) IntelliChlor reports 0F and I get txt, email, and app notifications. Temp sensor was replaced too. Not sure if InteliChlor/IntelliConnect issue...

Thanks gents for jumping on this fast. The upgrade wasn't nearly bad as I thought and I've learned a ton .

Pentair said not use the relay for the Intellichlor so I followed their guidelines. It's odd as it doesn't happen every time. The Pentair Home App is really janky though. It also reads 0F when idle. Does water drain back out of the SWG causing the odd reading? Other than that -- it works lovely.

The wiring is straight forward. Green and yellow in power center to green and white in Intelliconnect.

When the pump is idle, the IntelliChlor sometimes reads 0F and IntelliConnect generates messages that chlorine cannot be generated. This is odd given there is no flow and 0F seems off. Also, the heater is on and it is reading 75F which is clearly wrong. The IC60 replaces my old Jandy so the...