Search results

Has the latest app for EVO 614i enable scheduling/timer features? The older comments refer to this being a shortcoming, and possible reason to go with Dolphin over EVO if leaving in the pool on a schedule, but i also saw at least one mention that EVO updated the app. Trying to understand the...

Agree with Kim, I also prefer the one with the shelf by the house, especially if you decide on a raised spa - better visibility of activities in the pool, and with a sundeck that large you'll have a nice wide stretch of water from front to back which is nice if thats your primary viewing angle...

Since you mentioned freeform. . . we were putting together a design at one time that had both geometric and freeform elements. We ended up doing something different but I always thought it was a neat design. I was curious what it would look like in this space so I modified the general idea to...

What pool depth(s)? Raised spa? Do you want the sunshelf close to the house and in the shaded area (from the aerial picture), or outside of that shaded area?

Agree only one set of steps needed. Our spa is in the same location as your drawing and the kids use the benches in the deep end a lot. Not sure if you have a particular size sunshelf in mind or plan to put loungers on it like the picture, but a smaller shelf could open up some options on the...

I’ve only been running the stenner for 6weeks or so and the fist month short-filled the tank twice so was more like 2 weeks storage with no issues. Stretching for 3-4 now... I’m going into third week and still seeing no change in FC vs runtime. Will be keeping an eye on it over the next 10...

Got it, that runtime makes sense @6%. Yes I think you have plenty of workable options with different bleach concentration or changing tubes once you get up and running and see what setup works best for you. I don’t see any issues even with 50gpm and 10%. I use 12.5% and refill every 3-4 weeks.

Another stenner calculator that may be helpful here (or links in signature): https://1drv.ms/x/s!Ath3Nm5f-IFMc4hB5Urn9V9uAic Screen shot of output with the 45MFL5 (with spec #5 tube, 50gpd). . . looks to meet 80oz in 18 min, and 35-50min would dose in the 5-7ppm FC range based on 26kgal-10%-50gpd

I dont have firsthand experience with the products linked below, so consider this for information/awareness only. . . We became aware of these when scoping our build with similar questions on spa jets, but didn't have time to research fully and ended up installing standard jets. May be worth...

My 22gpd was pretty close so I use the spec rate for now, but figure that could change over time or when I replace the tube and may need to change the rate, so thanks for the good reminder! The spreadsheet I use combines a few useful calculators and comments I’ve seen here on how people are...

Came across an old thread offering some options for this. . . https://www.troublefreepool.com/threads/stenner-tank-holding-rain-water.129303/post-1143377

This may have been the excel table you had printed out from a prior post. . . https://www.troublefreepool.com/threads/stenner-pump-for-chlorine-help-with-sizing-and-install-ideas.160690/post-1441160 It was a really good summary table so I added it to the setup tab in the tracker I'm using...

I just installed a stenner this week and had put together a tracker to keep up with dosing and tank levels. Take a look and hopefully it may be helpful to you or others. To edit or allow selection of different pumps it think it will need to be downloaded. 1. Specs Tab - Choose stenner model...

#7 is microbrite ledge lights. #4 and 5 are pool and spa light. . . I wanted to control ledge lights and pool light separately, and I think the installer may have separated them after the initial wiring was done. Im just now realizing thats probably why the chiller is #6 and in between the...

Thanks All, yes I was thinking to use the Aux6 relay (currently a placeholder for a chiller) to schedule the stenner during the pump cycle. I only need an hour at most running the 22gpd stenner. Limited experience here with wiring so was worried about the changes needed to get the 240v on the...

We had plumbing and prewiring done for a future chiller, but we won’t decide to install for at least another year and may not install the chiller at all. Meanwhile I’m going to install a Stenner for chlorine before his summer so I’m looking into best options for that.. Stenner options I’m...

Econ T had some timer issues that other members had identified, but Stenner Tech Support just posted that it was a firmware issue and they've resolved it. I had ruled out the Econ T and was about to go with a 45 series fixed plus a wireless timer, but since they addressed the timer issue Im...

I had tested the old twice at 10ml, Only did 25ml with the new one. Thanks for the suggestion! Didn’t try wiping the tip of the new one on prior tests. I just retested 10ml wiping the tip and got 13 With the new, and retested the old again And got 12. I think that’s within reason, so I’ll...