Search results

Hi, I have a crack in the body of my current canister leading to air intake into the system and priming issues. I"ve ordered a replacement A&A LeafVac like this: LeafVac Debris Containment – Pentair-A&A Manufacturing Here is the install manual My piping is 2.5" 2". I am concerned with a...

Thanks, will swap it tomorrow.

Yes, replaced it 2 years ago. Would you suggest doing it again?

Hi, I've been having a reoccurring problem of my pool being overfilled. The filler is a Korky, similar to this one. The unit was completely submerged and water was still coming out of the spout at the top when I bent it up out of the water. Does anyone have any suggestions to stop this issue...

Reviewing my logs tests were 32 at 9:50pm and 30.5 at 6:15am. SWG was off for the night. Maybe one more over night test?

I enabled csi tracking in pool math. Reading .04. Is there a way to specify MY preferred target FC in pool math? Keeps defaulting to 6 and 4-11 range.

FC at 30.5 and CC 0 this morning so am ending SLAM as target was 31. Any advice on CYA,TA or other levels as I transition to SWG? Thanks all!

had the swg running super mode overnight and dosed liquid when dark. Morning test was 36 fc and .5 cc. cut back swg to normal for the daytime, tested at 28 mid day. Going to shut down swg soon, dose again when dark and see where it is in the AM. Trying to get the light working, but water is...

Yev, the SLAM is underway since yesterday and the SWG is back in action to take over when complete. I'm not considering using the cell to fix the problem. I've been lurking on this forum for a while and have done a bit of reading and am using pool math, which is excellent, so I think it's all...

Thats a good call! I noticed it was low last night. Using 50 drops for each test, I am about to run out found a bottle at a store and am off to fetch it soon. Got the cell up and running yesterday and salt is at a good level (3200). Understood on being tricked during SLAM. I'll shut that...

Yev, thanks for the feedback. I'm familiar with CYA and FC, which is why I am working on getting the SWG going again. I don't want to deal with adding liquid every day and the tabs aren't cutting it, so that seems like a better solution. I'm using pool math to get recommended SLAM FC targets...

Did the CYA - have to judge when the black dot is no longer visible. Got between 70 and 80 3 of 3 times using same liquid from sample bottle.

Just started Chlorantine - added 1.8 gallons of HASA and gave it a good scrub. Will test in an hour.

Thanks Marty, I have a Taylor K-2006 as recommended in some other similar threads. Suspecting this is your stock response as I believe I've seen this post before :unsure:. Let me know if any other advice before starting. Also the question still stands on if I should get the SWG running again...

Hi, I have a roughly 10,000 gallon pebbletec Shasta pool. It is configured for salt water generation, but have been using pucks the last 2 years. In floor spray head cleaners, cartridge filters. I've had some difficulties with algae over the last year and need to knock it out and get it...

Thanks for your reply Jim. Well that's unfortunate. I'm thinking that trying to get another matching half will be a roll of the dice - or will there be a good chance they will mate up well?

Hi, I've tried the usual things to get my Hayward filter to stop leaking. Model is C7020STA. I replaced the o-ring last month. I wipe everything down, use a generous amount of lubricant, reassemble carefully, and the tighten to 150 in/lbs. Just went and bought a deep socket that will do the...

Those are huge. Ordered! Thanks.

Excellent, thanks for this info!!

James, Model C7020STA is what is on the old upper filter head. Thanks!

Hi, I have a Hayward pleated cartridge filter. The housing bottom was replaced about a year ago and is now leaking from the inlet port. I can hear air pulling into it when the pump turns off and water leaks out when the pump starts. What would be the best way to fix this leak? What tool...