Search results

Well my theory was correct. This black string stuff is some sort of fiber optic. I took my splice apart and used a doodad where I could feed the white, black and back fiber in to each of its own ports and my time selectors lit up which they didn’t do before when I didn’t splice rhe fiber optic...

Here’s a pic of what I’m talking about. Yiu can see the black and white leads. Not an issue but have no idea if this black string stuff is somehow like a fiber optic or something that controls the 1,3 and 6 hour setting.

I appreciate all your answers but not one of them had anything to do with my question. I did an online repair/splice to black and white copper wire. No different than hanging a new ceiling fan using wire nuts. Not sure what y’all mean by twisting and pulling. The cleaner isn’t “pulling” the...

Hey all. I’ve read a few threads on here but haven’t quite found an answer. My dog chewed through my “tangle-free” cable so I thought I’d take a look and see if I can splice it. It’s only a year old and probably not covered by warranty for dog chewing. I peeled back the protective coating and it...

Yes you are correct. Plaster not gunite. No it does not puff aroind, disperse or cloud up when brushed. My pH is a little high right now. City water. Slat 3050 PH 8.0 Alk 90 I don’t have the others currently

My nautilus broke and while I had to wait almost two months for parts I kind of let dirt just settle on the floor. I went and bought a pool vacuum and was able to vacuum leaves and some Other stuff but it seems like the dirt has bonded to the gunite. I’ve brushed and brushed and brushed and it...

After further investigation and looking at a pentair intelliflow pump on the google, I didn’t realize that a threaded pvc joint goes in to the pump. The small hairline crack is in the pvc pipe right where it connects

It’s definitely after the impeller.

Ok, so I’ve done everything I can think of in regards to return line bubbles. I know this indicates suction side air getting in. I’ve changed gaskets on actuator valves, used foam test around connections, isolated main drain and skimmer with manual valve, cleaned filters etcetera. This morning I...

And now my service heater light but no code then goes away.

So I found that little black thing in my return line from my heater when I unscrewed my SWG so I now now that’s what needs replaced. Still a little rattling noise but is that because the sling is loose in there until I replace it? Temp still won’t hold but I assume that’s because the bypass...

I’m thinking this might be the issue. But I didn’t have any service lights come on.

Sorry. I meant replaced regulator not thermistor. It was corroded looking and stuck. When i replaced that the banging and cleaning stopped but gas would still kick off and on like the heat was meeting the set temp then so on and so on. Maybe the bypass switch where water flows in is messed like...

Like the gas plumbing? The gas pipe runs down the side of my wall from meter about 35’, 90’s about 3’ to the mastertemp Just cleaned my filters. Was doing this before and after cleaned filters. The thermistor fixed the banging noise. It was basically stuck due to scale or rust looking. No...

I recently had a clanging and knocking and rattling noise when my heater was trying to kick on. I found the thermistor was bad and wouldn’t open causing the pressure of the water to make the spring rattle like my heater was about explode. After replacing the thermistor no more banging and...

Following up…when I turn the valve and close the main drain the bubbles stop. What does that mean

Hey all. Posting this again to see if I’m missing something. My last post about this I had air coming back in to my closest return line from equipment. It’s seemed to have gotten worse and now the closest two plus spa have significant air returning. I’ve replaced the gaskets on the pump lid...

So, we’ve had an unusually long stretch of heat and dry weather up in Oklahoma. I know it’s summer and all but I’ve got a few questions. Is it normal for a pool to evaporate quite a bit during a dry hot stretch. I’ve had to fill my pool several times in the last few weeks to the drain line...

I’ll post some pics but how would swcg effect it? I’m assuming air is coming from suction side, not discharge side.

Yes. There is air and turbulent bubbles. Not like the streaming flow I’m used to that looks like there’s no water when it’s running good. yes air comes out of pressure gauge but no the bubbles don’t dissipate

I’ve got air bubbles, a lot, coming out of my two closest return lines and a small amount of air bubbles coming out of my spa return lines. I’ve checked everything. Skimmer basket doesn’t have any visible cracks. Checked Strainer Basket looks fine, replaced gasket, unions connecting pump to...

Here’s a few pics of some tile line and plaster that popped off also, top of the skimmer. Doesn’t seem cracked so not sure if this is just the rim around the the top of the skimmer or not. thoughts?