Search results

I dont believe the system is producing any chlorine. In the past, I could see bubbles coming from the closest jet when chlorine was being produced. I no longer see the bubbles. I will add some liquid chlorine to build up the level and then do the overnight test.

I noticed a few weeks back that the Nature 2 fusion is not producing chlorine. I was getting the 120 and 121 codes so I went ahead and cleaned the cell, checked the water chemistry, and salt level to rule out any simple fixes and everything checked out. I then proceeded to change the salt cell...

I had the Jandy JE3000TR installed when we built the pool back in 2018. I have never needed to use the chiller function until this year. The problem is that when I go to the unit and switch it to Chiller mode, it never comes on (works great for heating). I get a message stating "Remote T-stat...

Thanks, I will raise it to those levels.

I keep it at 50.

I have only acid washed it once and that was today. There was hardly any buildup on the cell. I thought I saw that the life was 10,000 hours but that could have been a general answer and not specific to the Nature system.

I have the 1400.

Yes, I run the system 24 hours a day.

I run the cell at 80% from April through September and 30% from October through March. It is the 1400.

I do not have any of the non working cells other than the one that is currently installed. The others have been replaced under warranty but the warranty expired last month. I replaced the cable one time within the time frame. I was never told what part of the cell failed so I am not aware of...

My pool was completed in August of 2018. Since completion I have had to change the cell on the Nature 2 Fusion Soft 3 times. The most recent replacement was in March of 2021. I was checking the system this morning and I see that I am getting the 194 and 125 code again indicating that the cell...

Sure does. Thanks!!!

I have ordered the TF-100 kit. Does the FC have to be a certain level before I add any conditioner? Do any other levels need to be to a certain point before increasing the CYA?

Thanks for the info. I will get a test kit and test the levels.

I noticed some algae on the corners of the pool so I checked the water with a strip test. The strip Showed no chlorine. I went and checked the Aqua Pure board and nothing indicating any errors. It had the Flow light green and indicated that it was running at 90%. Pulled the cell and it...

I will turn off the SWCG when I get home from work and see if the bubbles stop. I will see if it is something that can be done on the control panel. If not, I will just unplug it from the control box. I currently have it set to 70%. Thanks for the advice. I will re-lube the gaskets and...

Thanks for pointing out the fact that there might be a connection between the SWCG running and the bubbles. The bubbles are constant and do not stop unless the RPM's on the pump go up. I first noticed the bubbles stopped when the cleaner kicked on. The rpm's on the pump rise as well as a...

I had a pool installed last year and from the beginning I have had air bubbles in the pump basket and coming from one of the return lines. The builder has done two leak detection tests and everything seems to check out fine. I run the pump at 1800 RPM's 24 hrs a day (at their recommendation)...