Search results

I took the valve appart and was clogged, the redwood in my backyard is shedding seeds this time of the year and they're small enough to clog that valve. Cleaned it and after 20 seconds was clogged again... Ill just ignore it until the seeds are going away.

I readn an older thread , the manual valve could be clogged, Ill check that first.

I just noticed that the filter after venting the air has a very low pressure, Water/air used to come out at high pressure/volume and now is barely trickling torugh teh manual air relief valve. Opened the filter to change the cartridge and same thing the air would barely get in to equalize, I had...

Made a Silver donation to TFP , my way to say thanks for this great forum!

So quick update, found a capacitor with same spec and now everything works fine. Thanks again for your support!

Here is the capacitor

I’ll get on it now and remove the capacitor and head to Leslie’s see if they have it in stock if Amazon doesn’t sell it

The Pump was replaced 2 years ago by professional company under home warranty, I have no clue why that wire is not connected... Took them 3 months to come and replace the pump and I have no documentation for that as it was performed under the warranty and they didn't gave me any paperwork.

So first of all you guys are AMAZING!. With the controller in service mode I can start the pump and low speed , I got rid of the air and looks to work fine no strange noises so I went a step further disabled the low speed and high speed kicked in and I should ahve left it at that for today but...

Pump is Pentair WFDS-8 , usually should start at high speed. Ill try to see if low speed works.

Here are the pictures

Here is the link on youtube for the video :

Just came back from vacation and main pump won’t start. Pool is murky and have no clue how long the pump was not started. I put the system in service mode and recorded a video . Any suggestions are highly appreciated. I will add the video shortly to this thread

I ordered from Walmart and even tough I have Walmart + they only delivered less than half of the order, its a nightmare to deal with the online support, they can only do one thing... Apologize and tell you to move on....

BTW, I got the yellow salt bags from Costco, salt for water softeners and its nice white and pure 99.95% I am also in the Bay area, how much you paid for the re-plastering ? Would you recommend the company that did it ?

I found 5mm x 6mm x 14 mm brushes on Amazon , would these be ok ? What side is the wire connection , straight back or side ? https://www.amazon.com/uxcell-Carbon-Brushes-Electric-Replacement/dp/B07DZ11G34 https://www.amazon.com/gp/product/B07PXM3MXM

Any update on this ?

Dunno about the gel but sand is normal mainly from the walls and the dust in the air.

Probably water inside the motor enclosure.

I was wondering how is your robot doing, I was checking Amazon and they do not sell that brand anymore.

Definitely the Dolphin robot will do the job, I would also suggest to get a couple of Owl scarecrows to keep the ducks away. https://www.amazon.com/vdp/4bd34b08bc1948edbc423cb56efca97f?product=B079JYN1GZ&ref=cm_sw_em_r_ib_dt_zeoxesrpmUFAo

the enclosure is IPX so no air can escape, when it gets hot either from sun or just from the transformers the air inside expands leading to bubbling. My workaround was to drill a small hole withe the thinnest drill I have to allow air to escape. I will also look for a water impermeable mesh to...

Call Marina Pool and Spa , they might give you a deal as a TFP member.

Thanks ! I have dome the motor resetting and all good now , the E30 works just like my previous S200. So when I removed the screws the whole assembly just popped out , good sign that it was somehow under tension. Once I re aligned the motor the holes aligned nicely no tension , put the screws...

I’ll try that