Search results

Hi all... I noticed that the Jandy pump filter basket inline in front of the pump used to fill all the way with water when running, but now the basket is not filling all the way with water. Is this normal? OK? Thanks

I agree! I do not want to or plan on FLOC, but I would like to know if there is away to with a cartridge filter for curiosity sake. As of right now, SWG is off, and I am going to dump liquid chlorine in the pool and bring it up to SLAM levels, Fliter running 24/7 on 3000 and Polaris to kick...

Is is possible to FLOC with a cartridge filter? Can one just remove the 4 filters from the container and let the water run to the yard? I am not sure, but I don't think there is a way for me to bypass the filter in my plumbing?

Hello everyone.... We received about 5 inches of rain in less than 1 hour this morning and my yard is now in my pool! I went from crystal clear water to this: I have the cartridge and VSP on max at 3000 RPM, and the Polaris running.... The builder advice was to get some Flocculant and go...

UPDATE! Called Jandy/zodiac and they were amazing customer service. They gave me a number to call to a local company. I scheduled them to come out and they straight up replaced my aquapure 1400 salt water generator and all associated wiring. The center pin on the plug that goes on top of...

I have a service tech coming out to look at the system. I coordinated the visit with Jandy and their warantee department... Will keep ya posted

So over the last 24 hours or so, the swg has been working intermittently. When I get the error codes, go out to the box and press the reset button. Sometimes this works and sometimes it does not. Multiple presses of the reset button to get the system to work sounds like a software problem?

Pins are clean.. it is a 1400, I will work on getting you a photo of the pins. No corrosion, the unit is clean.. its is almost brand new.. only 18 months old

Yes, I do have the Taylor k1766 test kit and I just tested the water and the salt content is at 3600 PPM. Exactly what the Jandy operators manual says it needs to be

Hello, My Jandy Aquapure 1400 SWG has been working great since new 18 months ago. Last week it stopped working and while out of town, my pool turned GREENo_O I did a SLAM and got the pool back in balance, but the reason I went green in the first place was because the SWG failed. The codes I...

Jimrahbe, This is the first time I have ever opened the filter to clean them. The pool was opened for the first time in May 2018, So it has been about 14 months since new. I had some yard drainage issues and my pool filled with mud a few times after some big rain storms. I have since...

So this is my second summer with our new pool. I learned a lesson today and will be cleaning the cartridge filters more often! It took me 3 hours to hose these puppies off and get them to flow clear water. The pool builder told me to clean the filter when the pressure reached about 20 PSI on...

This is great! Thank you all so much for the intel !

Hello, I noticed that one of my two skimmers is not skimming.. well, at least there is no debris in the basket of one of the skimmers while the other one is always full of debris. I am not sure how these valves need to be positioned to control the skimmers and the main drain. Can anyone...

Thanks for all the replies! I dont think it could be fertalizer as I do not fertalize my yard... I have the PH lowered to 7.2 and the TA lowered to 60.... I am working on figuring out an aereator system to bring the ph back up while keeping the TA at around 60 and will continue to brush. I...

So the pool is about 1 year old now. I have been maintaining to TFP standards since the beginning. I noticed at the end of last summer there was one brown spot on the bottom of the pool that would not sweep away. I did not do anything about it. Now they are all over the pool. These brown...

Well.. its been a week and the water is clear now... I never measured any CC during the SLAM. I think it is just yard dirt and dust that has blown in the pool that made it cloudy. There is still quite a bit of dust when I sweep, but the water is clear. My FC is still a bit high at 11, but I...

For what its worth.... the first test yesterday I was able to fill the testing tube with the mixed solution and still see the black dot. So all I know is that is was less than the lowest mark on the test tube and that is 30. I added 1 gallon of stabilizer and retested and i lost the black dot...

CYA test shows 50 now after adding 128 oz of biogaurd liquid stabilizer 100. FC tested at 10. I am going to add 2 juggs of 121 oz 6% liquid bleach now according to pool math.

PH was around 7.0 before I started.... Going to go test again now... its been about 1 hour since i added liquid CYA

about 18 hours. I tested before adding bleach, and FC was 0 as well as CYA was less than 20... I could still see the black dot with the container full

My pool is 1 year old now. I slacked off on maintaining the pool chems during the winter months, and due to some yard drainage issues, every time it rains I get a lot of dirt in the pool. It has been a wet winter and I have had trouble keeping up. Well, the weather is warming up and my pool...