Search results

According to this Hayward table, a 30 Amp switch is required for 115V service to accommodate the STARTING amp draw for the motor. The Running Load will be less than this. https://hayward-pool-assets.com/assets/documents/pools/pdf/manuals/SuperPump-ISSPSERIES.pdf?fromCDN=true

I may be mistaken but my understanding is most of the pools are manufactured by 3-4 companies with finish/marketing and "name" being the difference between "Joes Pools" and "Family Pools". There may be actual differences in the design but they are made by the same manufacturer and should carry...

I am guessing pool store testing and number... if so; we highly recommend the TF100 kit or the Taylor 2006 I can tell you using the voice of experience that the $100 you spend on this test kit will save you at least 5 trips at $100, $1,000? at the pool store, since you will be shopping at...

If your water is cheap and clean; dump the water out, scrub and rinse the pool, and re-fill.. Its likely cheaper/faster than the chlorine required to get all the junk out.

How much can be calculated by using the PoolMath above I know for my pool a jug of 10% bleach gives me an FC increase of 10 FC, or 13 oz for 1FC The PoolMath makes the adjustment for your pool and the type of bleach you're using. I know I buy whatever is cheapest or easiest depending on...

Keep working the plan, sand filters can be low. If the FC is resolved with no loss overnight, only the filter that will remove the junk. How clean is the filter media? Sand doesn't "wear out" but if its too clean, it's slower to filter.

I don't have the same style DE filter (mine has tubes, not grids) but I have NEVER backwashed my system... I don't even have a backwash option without re-piping. As it's easy for me to open the filter head without loosing water or media, I just pop it open and look inside. When I see it...

As suggested, low speed may provide enough flow. Another option is to run on high when you need to run the SWG and use low any other time. As to the PoolSkim, it does require some fiddling to get it setup as the fittings are metric. The adapters were included for a standard install. I have...

How many amps does the motor draw? The Woods description I found says this and I am guessing the motor may draw more than the allowed 15A. Woods 50015 Outdoor 7-Day Heavy Duty Digital Outlet Timer Controls pool pumps, outdoor landscape, security and holiday lighting, and other heavy-duty...

Based on my 10 years of a 21 Round I have stuck with the flex hoses. I have two flex hoses, one from the skimmer to pump inlet and another from the filter exit to the pools return fitting. I have no valves and don't really miss them. When its time to separate the filter from the the pool, I add...

Unfortunately, the $100 kit is the price of admission but you will no longer need to spend $900 on the wrong answer. In addition to your test kit... you will need a manual vacuum head, an extending pole (for the vacuum head), vacuum hose and chlorine/bleach. If the pool is green, you can add...

Yes, if you drop granules into the pool, it can damage the liner. If the damage is above the water line, that was not likely caused by the standard pool chemicals (IMHO). It was the sun or other other chemical or physical damage. If the pool were left unattended for season/winter, it could have...

I would take off the old patch, clean the whole area, prime, paint and then add the patch over the fresh paint. I would also be sure to place a couple layers of duct or PVC tape over the patch to ensure the raw edge ove the patch doesn't wear thru the liner. If you are going to have the water...

This is why our main deck is not at fence level. I enjoy being able to be on the deck but not on display. The smaller upper deck was a nice addition that I added years later.

Wilbar makes about 6 brands and are one of the largest manufacturers, many without a known name. It is not unheard of for one pool to resin and another to have metal top rails. Just different options to get different price points and make comparisons impossible. It makes one different from...

Try laying the PVC parts in the sun and see if they fix themselves, been known to happen.

Are there any part numbers molded into the resin parts? Do a google search using just the part number, or add a small description, like "Part xx112233 Top Cap"

I am not an expert but in my AG pool, I think the foam coves work great. Step 12 of this Doughboy installation guide says: "Important Step: The cove is a vital structural element that prevents water pressure from forcing the pool liner out under the bottom rail. The manufacturer will not...

I assume an Aquabug will get caught on the wall's bottom edge/berm, the bug will climb the wall slightly and then be stuck where it's little feet cannot move it off the wall. With a straight walled pool, the black ring allows the bug to reorient and move off the wall. The cove at the bottom...

It's not a "duct tape" you want, its a waterproof PVC (red stucco tape) or House wrap tape.

Disclaimer: I don't know sand filters from Adam. Could you find a standard (non-Intex/Poly) sand filter that would allow you to keep the larger motor? Maybe Craigslist find from someone looking to move to a cartridge or DE? Or even a set with an existing 1HP and sand? I guess what I am saying...

I heard of one user that used paper to level his patio for an EasySet (bag) pool. I believe he used old newsprint on top of tarp. I don't know how well it will work for a pool of that size as it has legs. A wood deck would need to be engineered/designed for the weight of the pool (6836 kg or...

I know I am in the minority... I have NO VALVES on my AG pool. Its been this way for 10 years. I use one section of vacuum hose to "plug" the skimmer and if I disconnect the return hose, I either plug it or hold on to it with my hand, above the water level. My pluming is: Skimmer 6 foot hose...

It looks like it possible to replace just the wall... but that part may exceed the cost of a new pool. Looks like an elephant sat on the pool...LOL. This is of course, assuming the top rails and supports were not damaged. Sorry for your bad luck.

It sould like you are getting rid of the current pool. IMHO, I would keep the Hayward pump and Pentair filter. They are likely to have a longer life than the sack pools pump/filter. They may not work with the over the wall skimmer but would work with a standard wall skim. Unless, I read this...

It sounds like your pool wall is two pieces. One LOooooong wall piece with the pattern outside and one smaller section, frequently stainless steel, that the skimmer is cut into. This is not uncommon. This is from a google search:

The funny thing is, I live in the suburbs and there are no real lakes or ponds nearby. The ducks live in the neighborhood, people feed them and they stick around. This is the second or third year they have been around. There are creeks and a golf course a couple miles away but they stay near...