Search results

I had a similar issue with mine and solved it by just using some lube on the O ring.

I have an aquacal heat pump with a pentair vsp. The heater seems to like to see at least 1100rpm from the pump. I have my pump set to run 12 hrs at 1200 rpms. When the pump is off the heater shows lo flow on the display and shuts down to protect itself. When the heater again sees sufficient...

Try this. Digital pool pilot display not working

Hit menu. Should see test pool pilot on screen after about 3 seconds then hit select. If it doesn't show salt level then use up/down arrows to cycle data.

Your Autopilot Digital SWG is reading 1% because the water temp is only 57. The autopilot has a temperature compensation feature that automatically bumps the output up or down a bit based off temp reading. Salt water generators are not effective at those temps so it looks like its effectively...

My heat pump doesn't have any kind of internal timer. Is it safe to just rely on the flow switch in the heat pump?

Built my pool last summer and pool builder installed intelliflo and autopilot digital SWG and said to just run them with no timers 24/7. I've been reading these forums and don't think it is necessary to run pump 24/7. My plan is to use the built in timers for the pump and use a mechanical...

Thanks for the feedback. I will probably order this in a few weeks. I already have an autocover.

Looking to add a heat pump to my pool and since Raypak seems to be a recommended brand on this site I was wondering if Raypak Standard 133K BTU Digital Heat Pump R8350TI-E would be a good fit for my pool. Raypak Standard 133K BTU Digital Heat Pump - 013331 - INYOPools.com I will likely be...

Hey bmoreswim, sounds like you use a winter safety cover and leave your auto cover rolled up in the winter. We had a pool built this spring with an auto cover and also will be using a loop loc cover over the winter. I was concerned about rolling it up wet with the potential for mold damage and...