Search results

Does anyone know if there really is a major difference in heating and heat retention performance between a 12 mil cover vs 16 mil cover and Blue vs Clear? I've been using the 12 mil blue and debating going to 16 mil for better heat retention? But not sure if it really makes a difference ...

Has anyone tried installing the 1/2" drain plugs in the solar cover to let water drain through? Looks interesting, but haven't tried using them. Wouldn't you lose some heat retention? Anyway, looking for feedback. :) Thanks Rich

I'm a bit concerned. I've never seen the safety cover so far down into the pool with Ice on it. Of course, nothing I can do until spring. When the cover was put on, the springs were securely tightened. (about 50%). It's a Merlin Green Top grade mesh safety cover. The 2nd one we've owned. This...

Hi. I am looking to do a reseal of my patio. I will be rolling it on. Some say to roll the sealant on with one roller and then roll again with another at 90 degrees to get rid of lines? Has anyone re-sealed there own patio ? Can you share your experience. ? If I have to do it this way, then I'll...

Hi. I will be re-sealing my pool patio soon. I know it will be slippery after the reseal. Was thinking of using an additive. There are a lot of different types in the market. However, I have heard from many that the anti slip usually wears off after a year. Also, some said they could see it on...

HI. We just opened the pool on Thursday. The pool is running 24/7. Still cloudy. Fully vacuumed twice. Have Slammed it it twice using the info on the app, but still can't get rid of the CC. Air temp has been about 55-65 degrees F. Water Temp: 58 CYA: 35 (In the process of raising) PH: 7.2 FC: 2...

Hi. I am about to reseal my stamped concrete pool patio. It was previously sealed with an Acrylic sealer with a color added to it. It lasted quite a while. When they originally sealed the patio, they did not include the egde of the patio within the pool area itself. Shouldn't that concrete be...

Is it ok to use the Blaster Silicone Lubricant spray on O’Rings? Especially on the large O’Ring on the cartridge filter ? Thanks Rich

Is it recommended to put O Ring lube on the Oring on the plug (see photo) when closing/winterizing the pool ? Thanks Rich

I’m trying to decide if I should remover my skimmer weir when I winterize my inground pool. I haven’t done so in the last few years, but have seen articles saying you should. Any thoughts on if and why I should remove it or not? Thanks Rich

Hi. I've read the closing an inground pool process. It says to SLAM a few days before, and let it come down to normal as long as the Overnight test holds. 1. However, if I consistently do not have any CC showing, do I need to SLAM at all before closing? 2. I do add polyquat 60 before draining...

For closing the pool this fall I always use pool safe anti freeze. I saw this at Home Depot for a fairly low price. Says on bottle that it is safe for swimming pools. But the description says …. 128 fl. oz. Ethyl Alcohol -50°F Universal Non- Potable RV Antifreeze. Is Ethel alcohol safe to use...

Hi. Here in the North East, at the end of the summer, I take the solar cover off the reel, fold and store it. I used to also take the reel apart in order to fit it into the pool house. However, as most know, over time that disassembly and reassembly causes it to weaken and sag. This year I am...

I have a new cartridge filter. I always add anti-freeze when closing pool. My question is, when I turn it on in the spring, will the anti-freeze that will be in the one suction line (skimmer) damage the cartridges in the filter ? Can you run the filter without the cartridges while clearing the...

Is this amount of air in the pump normal? I've checked the fittings, etc. and have no water leaks. Air getting in from somewhere ? The video was taken with the VSM pump at max 3450 rpms for a bit. The amount of air seems to be consistent at all levels of RPMs. Thanks Rich

The title pretty much says it all. Lol. I am going to connect a new filter. All my plumbing is 1-1/2” . However the “out” on my pump too has 2” opening and the “In” one on my new cartridge filter (Hayward C4030) has a 2” opening. Can I run 2” pvc from pump to filter even though all else is...

Hi. I currently have the Hayward S244T sand filter. The pump is connected to the filter with a heavy duty flex hose and clamps on both ends. I will be installing a new Hayward C4030 Cartridge filter in its place. The "In" on the new filter is a little lower than the outflow on top of the pump...

I am looking to buy the Hayward W3C4030 Cartridge Filter unit. I noticed that Leslie Pool sells it, but indicates it will come in black color. Amazon shows it in Tan, but some say they received it in black. Other Pool places and Home Depot show it in Tan. I asked them to confirm what color will...

Hi. I have back flushed and run on rinse on my sand filter until clear water shows. Yet, when I change from a lower speed to a higher speed ... like 2300rpm on my Hayward VSP pump, I get cloudy return water. My thought is that the sand is just not clean enough, and when the SVP pump is set...

Does anyone have experience with Doheny brand Cartridge Filters. Just wondering about the quality. Considering buying one. Pricing is much better then Hayward or Pentair. Anyone have one? Or experience with one? Thanks Rich

Does anyone know if it is worth the extra $300 or so to buy the Hayward “Expert Line” version of VSP pump? Supposed to be an upgraded motor with Vitor Seal. Can only buy from a Hayward certified brick and mortar pool store. Warranty covers 3 yrs parts and labor, but it’s a big cost difference...

Does anyone know if the process to change the seal on the Super Pump VSP is the same as the single speed Hayward Super Pump. I’ve changed many on the side Nile speed Super Pump, but never on the VSP version. Thanks Rich

Hi. For the first 2 weeks of pool opening, I won’t start my salt generator until the chemicals stabilize. I raise my stabilizer level with with stabilizer and by using stabilized tricolor tabs (for chlorination as well). Usually put the tabs directly into the skimmer. Seems more effective that...

Hi. I am looking to find the best way to clean dirty flexible and rigid pvc lines between the filter and heat pump, etc. Just a cosmetic thing. :) I searched the site, but couldn't find anything. Is there a product out there, or just water and dishwashing detergent? Thanks Rich

Hi. Currently I have a bypass set up so that I can skip the heat pump until the water is clean and chemistry where it needs to be. Some are telling me that I should take the bypass out to get a better flow rate and that overall it's just not needed ... overkill. Wondering what others think. I...

Hi. I am looking to move the control pad from the pump to another area. They sell a cable for it ... Hayward VS Pump Communication Cable SPX3200DRCC, but it's only about 20ft long. I need longer. Does anyone know what the cable specs are so I can buy a longer wire. Is it just a low voltage 4...

Does anyone have & use the Caddy/Cover for the Dolphin Pool cleaners. I have recently bought the S300 cleaner and wondering if the caddy is useful or just an extra. No, it didn't come with my unit. Interested in your thoughts. I know the control unit is not waterproof, so I'm thinking of...

Wondering if anyone has used these grommets with your solar covers? If so, any feedback? Purpose? Quick Drain Grommet System Thanks Rich

I see a lot of posts about the difference between 8, 12 and 16mm covers, but not much about Blue vs Clear. I live in CT and use a Heat Pump at the beginning and end of our short swimming season. I’ve mostly used 16mm clear over the years. But, now I’m older and the 16mm is too heavy to reel and...

Hi. I have a meter located about 4ft from the filter and just before the heater. All my lines above and under ground are 1 1/2" pvc. I have 1 suction line. It's the line from the skimmer to the pump. About 15ft. The line comes out of the ground by about a foot and then is connected to the pump...