Search results

When you get them on the phone, they are great. However, I'm not sure it's worth the time it takes to contact them. My cleaner is under warranty and it's been 4 weeks since I've used it. The timeline is like this... Day 1 - I noticed it wasn't working. I left a voicemail at marina during...

The 3 options I see on Amazon now are... Aiper Seagull 1500 (Cordless) $696 Aiper Orca 1300 $600 Aiper Orca 2000 $900 I'm not sure I want a cordless one b/c it would still need to be 'touched' more often. If i leave town for a couple of days, I like knowing that my cleaner will still run...

I guess I need to look closer at the Aquabots as well. I really like the wall and waterline scrubbing that my Warrior SE does when it's actually working. I really love the job that my robot can do, but I no longer have any faith in its longevity. That is why I'm having a hard time finding a...

Thanks. I'll check those out. I went down the rabbit hole in 2020 when buying my Warrior SE and saw that it was the same as the triton and s200. I get a ton of benefits from my robot so I want to have something that can do the same thing. By no means am I wanting to buy another Maytronics...

I bought the Warrior SE at the end of 2020. I have shipped it off three times for repairs. In fact, it's been down for over 3 weeks now and I still won't get it back for about another week at best. I believe the warranty is up in a few months so I plan to sell it and buy a replacement b/c my...

Yes except when we swim. I will check this. I've honestly never paid much attention to it. Any suggestions/tips on what I should look for. How free should it swivel? eta: I checked the swivel. I was able to pull it apart and turn it manually. However, it doesn't seem to move very freely. It's...

I've had this cleaner since November 2020. Until about two months ago, I rarely had any issues with the cord. But now it is tying itself into a knot at least once a week and the cord gets pulled through the front roller pretty often. I can usually pull the cord out and get it...

It’s dry now. I’m almost certain it didn’t get wet until I was troubleshooting. It was closed for at least the first error. Thanks for the tip.

As far as know, everything was running fine until I went to clean the pump filter/basket about an hour ago. After cleaning it, I turned the pool back on but the pump displayed an error of ‘Over Voltage’. I did several combinations of flipping the breakers, turning the pool on/off, and hitting...

Update. It’s a 1.5” inch connection on the plate. Thankfully I cancelled the 1-1/4” hose. When the skimmer plate came in I took it to wal mart and was able to match it to the 1-1/2” hose.

I have a Waterway Renegade skimmer. The part number on my lid says 519-6450 R6. The online search results are white, but mine is gray. Anyway, I bought this skimmer snap in vacuum plate, but it does't have the hose size listed anywhere. My vacuum head can take 1-1/4" or 1-1/2". So I ordered a...

I have a Warrior SE and it's done that a couple of times. I believe my robot is a nascar fan and only makes left turns in order to twist the chord.

thank again for all the info. I found an old post from 14+ months ago which someone mentioned... That explains one issue I'm having. My pump speed isn't changing if I turn on the spa while another circuit group that controls the pump flow is also on. In living with the understanding that the...

thanks @MyAZPool . That kinda what I was assuming. Thanks for the confirmation. If you'd prefer me to put this in a different thread, please say so. What is the best practice for switching bt circuits and circuit groups? Prior to using this I only use the default spa and pool buttons on the...

Hi @MyAZPool - In your video, it appears that your standard pool pump speed is 20 GPM and all of your feature circuits are higher volume/speed than that. While I have been playing with my feature circuits. My PB had set my pool to 60 GPM. I was creating feature circuits to slow down my...

Thanks again @MyAZPool & @Jimrahbe . With your help, I ordered a couple of Intellivalves and installed them today. I'm using them on my deck jets and bubblers. I couldn't get an expansion card so I didn't buy the third Intellivalve that I wanted. Currently, I've created feature circuits that...

Another update in case @Jean-Luc returns at some point. I have globrite led lights. I can turn them on/off with my Home Assistant. However I can’t seem to change the color. All in all, I’m still very happy. I’ve now created an Backyard dashboard. For the time being it’s only my pool. I’ll add...

I may have to try the brass brush unless I can get something else to work. I spent about 35-40 minutes in the spa this evening scrubbing and I don’t think I accomplished anything. I mixed muriatic acid and water 1:1 in a spray bottle. I used a pretty stiff plastic brush that is stiffer than my...

I need to test that out. I don't know how durable my tile is. This is what I have. Verona - Tondela Blue Now that you mention it, that is where mine is the worst... tanning ledge and spa (with arm rest around it)

Thanks Jim. Their site shows the intellivalve in stock but the expansion module isn't. I'm not in a hurry. So I might just buy two of the intellivalves and install them on my water features (bubblers & deck jets) since they should fit on my existing board. I can always come back later and add...

Thanks again for all the great info. I've been reading the info that @MyAZPool referenced above. I think what I need to purchase is: Pentair Intellivalve 13 LED 24V Sealed Valve Actuator 180 Degree Swing 521485 (qty 3) Pentair Intellicenter Valve Expansion Module | 522038Z It seems like parts...

I've seen this occur in the past, and I've been able to kind of rub it off with my hand. However, I noticed the line Sunday when cleaning the pool and testing the water. Sunday I tried to rub it off with my hand. No luck. Last night I was not able to scrub it off with a brush. After reading...

Thanks for all the info. I feel like I’m about to go down a rabbit hole. Lol this is part of my motivation. I run my bubblers all the time bc I don’t want to manually turn them on and off when I’m out there. So if I can automate this, I should be able to keep the ph levels regulated easier...