Circuit Board Aquarite Goldline SWG

Jump to latest Follow Reply
I think that you have the display on incorrectly. You missed a pin by one spot. Each hole needs to get a gold pin.

Also, the the bottom of the board is behind the bottom triangles with the screws. The board should be in front of the metal white triangles.
 
Last edited:
img_9184-jpg.170356


You can see a gold pin on the left that is not going through a hole. Pull the display off and reinstall it with a pin going through each hole. There are 7 long gold pins and 7 holes in the display board.

 
Last edited:
JamesW said:
img_9184-jpg.170356


You can see a gold pin on the left that is not going through a hole. Pull the display off and reinstall it with a pin going through each hole. There are 7 long gold pins and 7 holes in the display board.

Click to expand...
You, once again, are absolutely correct. I reinstalled the display & all seems to be working as it should. And, again, I owe you many, many thanks.
 
  • Like
Reactions: JamesW and mknauss
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply