For those who don't have a metal ladder, and don't have metal pool light niches; what is the preferred way of bonding the pool water as per NEC 680.26(C) ?
Bonding Pool Water
- Thread starter DoDo1975
- Start date
It helps to know what type pool you're talking about. the most universal water bonder is the Perma-Cast P2008. It's put into the plumbing so it will work for either an inground or aboveground pool.
- Jul 21, 2013
- 53,006
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
From Electrical Bonding - Further Reading
- The pool water must be bonded to the bonding loop with a device like:
- the Burndy BWB680AGRK Waterbug Pool Water Bonding Kit. You drill a hole through your skimmer and install it there.
- the Perma-Cast PB2008 Water Bonding Fitting PB-2008 in the pipe going to the pump on a tee fitting
Similar threads
