Possible SWG Installation
- Thread starter ctraveler
- Start date
I think you could if you find one that allows for vertical placement. It would be the last thing before the returning valve to the pool on that long vertical pipe.
Remember you want a cell at least 2x the pool's volume.
Maddie
Remember you want a cell at least 2x the pool's volume.
Maddie
djdonte
Well-known member
- Mar 25, 2019
- 579
- Pool Size
- 11300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-30 Plus
I just purchased a RJ-30+ from Saltwater Swimming Pool Systems & Supplies | Discount Salt Pool and am installing it vertically but that run coming off your filter should be enough.
Ok, thanks. So just to make sure I'm clear. The verticle pipe that you are referring to is the one with the arrow. Correct?I think you could if you find one that allows for vertical placement. It would be the last thing before the returning valve to the pool on that long vertical pipe.
Remember you want a cell at least 2x the pool's volume.
Maddie
Attachments
djdonte
Well-known member
- Mar 25, 2019
- 579
- Pool Size
- 11300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-30 Plus
Yes you are correct. The RJ30+ I am going to install this weekend needs 20” of pipe (approx) with the cell and flow switch. Other salt cells will be comparable. Also the flow switch could go elsewhere but I didn’t want to make more than one cut.
It looks like you would have the space needed as said above. On the off chance it didnt fit you could just add a loop off that vertical pipe with the arrow. You could buy the kit normally designed for vertical loops and turn it sideways to make it horizontal.
Similar threads
